All Activity
- Past hour
-
There are 3 or 4 IntelliTouch drivers out there. I think I have tried all of them. The only one that I would recommend is the bNet Solutions driver. It is (in my view) the best pool driver out there and has better (more complete) integration than any other pool driver I have seen and I have seen many Pentair and other pools connected to Control4. It is also the only IntelliTouch driver that I have seen which 100% reliably gives 2 way control to the various Pentair circuits etc.
- Today
-
Does anyone know where I can find a driver for a pentiar intellitouch?
- Yesterday
-
Yes, the fan controller buttons are fully programmable - unlike the KC120277 the layout just can't be changed. For the record: KC = configurable keypad. Doesn't control a load itself KD = is a keypad and dimmer in one, so controls a load as a dimmer (and yes not what you want here at all) KA = something else entirely in that it's a special device to act as a multi-way switch for cheap (think top and bottom of stairs), no programming involved (or possible) and looks like a C4 regular switch or dimmer but no leds.
-
anyone know if there is a way to map the 4 color buttons to the color buttons on the actual remote? (in this case its a Droidlogic Sword+ box) Control is working but the client needs to be able to use the color buttons to switch between different views in the app they are using (OnAir). I only see the ability to map the color buttons to app shortcuts.
- 62 replies
-
- android tv
- chowmain
- (and 6 more)
-
I don’t want to turn off the protection, just add an exception to run a program. However, my issue may be entirely unrelated to rebinding. And if doing an exception opens up significant vulnerability, I won’t do it. Sent from my iPhone using Tapatalk
-
Pretty sure DNS rebinding is a way for hackers to hack your PC. Why do you need this protection removed??
-
a KC works.
-
This is the current C4 fan switch in my master bedroom (AC fan) I didn't want to confuse the pictures, thus the 2nd follow-up post. You're saying I could reprogram this switch when I have the DC fan installed and add scene keys such as Music (on/off), TV (on/off). Just not the volume rockers, which I'm OK with as there is a touch panel nearby and remote.
-
Would a C4-KC120277 work? Sorry as I'm not an electrician by trade trying to understand KC, KD (which is a dimmable programable switch and not appropriate for a fan) and KA . Trying to understand the types of C4 light switches that were installed, as I update from AC to DC fans. Yes, I would like to change the layout of the programmable keys and why I don't want a 'dummy non-control 4 switch' Is the attached photo an example of a KC120277, as the top button controls two AC fans on my porch and the reminder keys are for scenes. I assume I can re-use this light switch (attached photo).
-
"Mitch fixed it"? haha, well i didn't fix it, I just clicked upgrade! Happy to help anyone else upgrade to 3.4.2
-
msgreenf reacted to a post in a topic: Disconnect dimmer from load
-
@msgreenf fixed it for me with bindings - thank you! As an aside: I recently purchased Text Expander and I think I'm going to add the phrase "Mitch fixed it" to Text Expander given how often that happens
-
I was able to test 3.4.2's fix for remote connection of Composer HE to both properties with C4 and can confirm that it is working again which is a great fix! Note that you need to have separate licenses for HE for each property. Thanks to @msgreenf for upgrading me and helping me work through this over the last few weeks!
-
Hello, I am hoping someone can help. I am running an Araknis 220 router. Long story short, although it is way over my head, the working theory is that the router is blocking “DNS rebinding” and I need to setup an exception in the router. I cannot find anywhere to do it. Does anyone know if such an exception is possible with the router and if so, where do I do it? Thank you! Sent from my iPhone using Tapatalk
-
Who ever said programming was supposed to be fun? RyanE
-
Chowmain - athom Human Presence Sensor Driver (mmWave)
ERDrPC replied to alanchow's topic in Third Party Software
They only way I known to use Aqara is to setup home assistant and connect to C4 -
You'd bypass it's control wire and do a passthrough power to the ceiling fan location, at which point you could still use the existing fan controller as a keypad (but you can't change the layout so you're stuck with that. Alternatively you'd put a wireless keypad in place so you can configure it to you heart's content)
-
Mockupancy and Alarm integration
Cyknight replied to ERDrPC's topic in Troubleshooting, Workarounds, & Bugs
For notification on not playback: that's just Idle. Idle is neither record nor play - so yes it would notify you if it stops recording if used barebones, but if that is an issue, you can just add an IF statement for IF it is recording - stop, then do the notification. As for your programming, why bother having the IF/Else statement to stop? If it's not playing, a stop command simply won't do anything to begin with: you're just over complicating things there. The not always disarming, and the programming not triggering when disarming from the panel are most likely not an issue with the mockupancy: it's likely an issue with the alarm panel or it's driver: networx however is so outdated at this point, that I doubt you'd be able to find much support except on here - provided someone here is familiar with the product. I fear your best answer will be getting a current alarm panel to replace the networkx. GE/interlogix has been gone for nearly 5 years, with end of support nearing 3 years.... -
I still use their products, yes, no recently but they make great products
-
Mockupancy and Alarm integration
ERDrPC replied to ERDrPC's topic in Troubleshooting, Workarounds, & Bugs
Who can I ask about the intricacy of mockupancy if no answers in the forums? My installer doesn't know.