ichbinbose

Generally a poorly working system is dealer error. I would defiantly look for a new dealer. Sent from my iPhone using Tapatalk

Check out halo in libertyville or MTS in lake villa Sent from my iPhone using Tapatalk

Look at the picture i posted. You can integrate but you need the intellitouch part as well Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

The only pentair driver is for the Intellitouch i9+3. So unless you have that as well ( which is actually right on their website) you aren't going to get very far Sent from my iPhone using Tapatalk

My best advise is to install a verifiable pool controller that has a ip driver available. This will then allow for a easy integration and also provide an app for further control. I would also contact the manufacturer of your existing pool controller to see if third party integration is even a possibility with your current model to make sure your not on a wild goose chase Sent from my iPhone using Tapatalk

Every pool that I've integrated needed a wire to the controller to either provide a network connection or to use rs232. It also has to be a unit that allows for integration. I don't recall ever seeing a pentair EZ touch driver so that could also be a limiting factor. Sent from my iPhone using Tapatalk

After using several Doorbird's all hard wired, I can absolutely attest that what the marketing is vs reality are vastly different. A couple of notes from Doorbird tech support Only the first two devices on the LAN will connect locally, the rest (up to 6 for a total of 8) will have to connect thru the cloud. Two just because it's an onvif does not mean it will actually record to a local nvr Three if you need to do an ra be prepared for the least pleasurable experience and crappy policy Sent from my iPhone using Tapatalk

Log into your my.control4 account and disable your dealers remote access ability. Then unless they have a vpn your set. If there is a vpn setup you need to log into the router and disable his credentials Sent from my iPhone using Tapatalk

Vantage has more time in the field with panelized lighting. If your not doing panelized then C4 is the best way to go. C4 lighting helps with your zigbee mesh network, Vantage does absolutly nothing for you're zigbee mesh. Programming is easier with C4 Keeping everything C4 will give you greater flexability. Unless your building a 20,000 sq ft house or larger then I really don't see any benefit to using Vantage. Personally, if I were to choose a lighting system other than C4, I would go with Lutron.

Sennheiser wireless headphones work great

Anytime you wish to add or change a product you would have your dealer do this. Composer HE allows you to change programming, not products/bindings

No software=no work

Control4 is not a DIY. Although if you really wanted to do some setup yourself you may be able to find a dealer willing to accommodate you. As for final setup and programming only a Control4 dealer is able to do this. This is even more the case with 2.0 since the software is now locked down.