I have a Denon turntable connected to a Denon AVR-2700 in the main living room. I have the Zone 2 output going to input 4 on a Response 16 Channel Amp (through stereo connection over Cat5). When I select the turntable, all items turn on and select the appropriate inputs (both Denon and Response). But, no sound coming through speakers from turntable.
Any thoughts on what the issue could be?
Thanks
First time having the Chime doorbell. Can anyone explain how to play a mp3 file from the speakers upon a button press? Completely blanking on how to or where to add media and then how to set to play.
Thanks
Looking for some color changing LED lights to put on the back of my TV that integrate really easily into C4. Any suggestions would be appreciated.
Thanks
I installed the Fusion solo mainly for Spotify integration and song selection from touch screens. For anyone that uses this, is there a way to shuffle the songs? For instance, when I select a playlist from my saved lists on Spotify, it starts playing from the same first song. Any assistance would be appreciated.
Thanks
So my new home has AT&T TV and it has a new digital media box (much like a Roku, etc). Is there a driver for this? I've seen a mini app driver that connects to TVs, but have not seen one separately for the set top box.
Any help would be appreciated.
Thanks
Have a small cabin that I want to add Control 4. It is a simple living room / bedroom. Will have a TV in living and want music in both rooms. Music needs to be stand alone speaker type (think Sonos) as I cannot install built in ceiling speakers. For music we like to stream Spotify.
Looking for recommendations on equipment Will EA-1 be enough? What options for music speakers? TV can be sound bar or stand alone and want speakers / system to integrate well / easy with Control 4
Thanks in advance
We have a snapAV 8x8 matrix, running snapAV HDBase-T to each TV. TVs are samsung or Roku TVs. All are HD and I am only running the cable boxes at 720/1080 (no 4k) There is one surround receiver on one of the matrix outputs - Denon (not sure of specific model, but newer/IP controlled).
As stated, all was working just a week ago. Then everything went a bit haywire.
We have 3 DirecTV boxes and an AppleTV going into an HDMi matrix. One box and the AppleTV work fine. The. Just this week we have two boxes that display a picture that is purple tinted and no sound comes from the source. These were working fine last week.
Any thoughts on the issue? Bad boxes? Bad HDMI cables? Messed up coding (not sure of all the terms like EDID, etc)? Thanks in advance
I am trying to figure out how to handle gaming consoles. We have a large home with a remotely located AV room (too far for standard controllers). And home is very modern with no furniture at TV locations to house/hide consoles. So, what are others doing with this type of issue/setup? Is there something to extent the range of controllers? Something to mount near the TV that sends signals back to AV room? Is there a way to mount the console behind a wall mount TV? Any suggestions would be appreciated.
I have a Samsung IP controlled TV. I added to the project per directions. After pairing the TV works fine. However, after turning the room off and back on, all controls are lost. TV still comes on but no volume, no navigation control in mini apps. Any thoughts on what the issue may be?
I am adding a second zigbee network (CA-1) to split out the network into two. Quick question on set up. When I am removing devices (say a dimmer) from the old network, can I just disconnect on composer and then reconnect to the CA-1 with the correct button pushes? Or do I need to do the button sequence to remove the dimmer from the mesh first?
Thanks