Jump to content
C4 Forums | Control4

cfduran

c4Forums Member
  • Posts

    27
  • Joined

  • Last visited

Everything posted by cfduran

  1. I am trying to update the HC250 from 2.9.1 to 2.10.6 OS, however I got an error whenu pdating related to not enough space available to make the upgrade. How can I improve the space available in the HC250? Any idea will be appreciated!!
  2. Now, it is at 25 channel Enviado desde mi iPhone utilizando Tapatalk
  3. I have a problem with my lights ... for example when I turn off a light from my phone it physically goes off, however in my phone it shows as turn on at 100% or any percentage. Sometimes, after some seconds it shows complete turn off at the phone, sometimes it keep turn on despite physically is turn off. This is causing problems as the lights controlled by sensors do not turn on because they are turn on into the OS (showed in my phone) but physically they are turn off. I have changed zigbee channel, I deleted the zigbee network and create a new one. The problem continues. Lights were working ok but they started to have this behaivour two weeks ago. My controller is an EA3 and I have ADP, FPD and SW (12 in total), OS 3.1.2. Any idea to check into my system to fix this problem.
  4. Problem solved with channel 25. Thanks for your support!!! Enviado desde mi iPhone utilizando Tapatalk
  5. OS version is 3.1.1. Zserver is running on EA3 controller. All devices shows 100% signal. Channel is 22 Enviado desde mi iPhone utilizando Tapatalk
  6. I have a problem with dimmers and kpd. When I turn off the lights from (from my phone or directly from the device) the lights turn off, however the app show the light turn on but it is off. Sometimes, I turn off the lights and next day I found the app showing the ligth is on. What I have to do to solve this problem? I have to delete the zigbee network and create a new one but I am not sure if I have to identify again all the dimmers and kpds.
  7. No, the driver does not have the option to input the passcode into the partition for arming. I re-check and there is communication between the IT-100 and Control4, but I have no idea about this situation. I replaced the IT-100 and the behaivor is the same.
  8. Thanks for your support. I checked the driver and I am using the correct one. I have the same UI interface, but the alarm do nothing when I press a button from the iphone or ipad. I have deleted the alarm and created it again, but same situation
  9. I have a system with a problem using the alarm DSC1832. I am using the IT-100 connected to I/O Extender port. Alarm system is working ok, however when I try to arm the alarm from the C4 interface (IOS) it does nothing, so it does not arm, it does not receive any command from this interface. I checked from composer the communication between the alarm and C4 and it is working. In last serial debug command received I get information online, if a sensor activates it is showed in debug command line, anything happening with the alarm is showed at debug command line. I was thinking the IT-100 was broken, but I see it is working and communicating with I/O Extender. Any clue about this problem? I appreciate any help or support with this.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.