BuddyC

I'd love to see it for the Sony TV as well as Roku. I have both!

Next time it quits working, I will try that. The DTV app will be a good test. I do know that the C4 app doesn't work but that is no surprise if the remote isn't working as it is all IP. The DTV app should be IP also so that will be a good test. Next time it happens I'll report back. Don

They are wired via coax. I believe there is no network on the minis.

Many times. Works for a while but then eventually stops working. I should note that it will intermittently start working again too. it's a total guess as to when it works and when it doesn't.

I recently started having this issue regarding IP control and wondering if anyone else sees this? I have a Genie (not the newest Genie 2) with minis in the bedrooms. Every once in a while (intermittently) the minis will stop responding with the C4 remote (IP control.) However, the original DTV RF remote will control the room just fine when this happens. If I turn on the TV in the room with the Genie, the minis will start responding via the C4 remote. The behavior seems as though the genie stops responding to IP control. All power settings are set to not sleep. I've even gone as far as to have the genie replaced by DTV support under the guise of some other issue. The new one behaves exactly the same. It leads me to believe it is due to some software update they did. Anyone else see this? Considering moving to IR control to solve this. Don't want to but might have to - using 2 remotes now. Do we have to install a different driver to get IP control? Thank you, Don

Ever since 3.1.1 where they've removed the default password, my Domotz software isn't able to log in and I can't use it to reboot the devices. Does anyone have a workaround? Thank you for your help!

Here's one I created but it's not working... When Tidal is selected, the Roku doesn't switch to the Tidal app from whatever it's on. Basically it does nothing. It's almost like the application ID isn't right but it's the ID that composer shows when Tidal is selected through the Roku app. The ID I'm using is 294792. Any help is appreciated. Thank you, Don roku_tidal.c4z

Looks like it's 294792 from within composer.

Does someone think they could create one for Tidal on Roku? It would be incredibly appreciated!

Now that there is a Tidal app for the Roku, has anyone created a mini driver for it? Thank you, Don

Joel, Just wanted to let you know that this driver was a HUGE help. Works great! Don

The v2 app for the iPhone and iPad had a dedicated mode that would stop the device from sleeping so you could use it as an always on controller. Did I miss something ... did they remove that functionality from v3? Don

Joel, I think that worked! After a reboot I had to re-enter some of the server credentials but they finally stuck. Thank you for that!! It's been years of dealing with that darn driver! Don

Wanted to let everyone know that deleting the driver, rebooting and reinstalling worked. However, they still haven't fixed the problem where the cameras have to be re-identified (reselected) after the controller reboots. This has been a problem for years! I know there aren't a lot of people with this problem but it would be WONDERFUL if C4 could fix it! (And I've tried everything to fix it... deleting the driver, deleting the driver file on the controller, re-downloaing it, reinstalling, etc. and nothing works) Don

I have to agree with everyone here... The only real reason I got an Apple Watch was for the C4 app but it Never worked reliably. I tried every suggestion I found and nothing worked - just kept rebooting itself. Well, about a week before I upgraded my system to 3.0, either apple or C4 must have done an update and it started working. I got to use it for a week and now it's not supported. I vote for Watch support in 3.0. Don

We installed 3.0 and the SecuritySpy driver stopped displaying camera images. Has anyone tried it and got it working? It appears that when we double-click the camera in composer, if we choose mjpeg as the format, the image appears in composer. If we choose h264, the image fails. I've tried going into the SecuritySpy server and changing the camera format to mjpeg in SS but C4 doesn't pick it up. Any ideas?

South Africa, It does, thank you very much.

I understand that drivers using the older proxy are not supported in 3.0... I have the Houselogix HSIM driver and board controlling my Honeywell Vista 20p.Does anyone know if it will work with 3.0 or how can I tell if it will work? Thank you, Don

Haveitall we went right to deleting the driver and adding it back in. That resolved the problem. I don’t know if that was necessary though. Try just reselecting the roku device in the driver first. Don

Just wondering if anyone knew anything about my post above? TIA!

I wanted to see if anyone has experienced similar issues - maybe there's a simple solution? I'm using the Plex Full driver on a Roku Ultra box. Everything was installed and working perfectly until last week or so when Roku updated their UI. Previously, hitting Plex Control on the remote would switch to Roku and launch the Plex app with full direction and selection control. Once Roku updated their software, now when I select Plex Control, the Plex app is launched on the Roku but control is dead. I can't move or select anything. However, if I go to the Roku driver on the remote, I can launch the Plex app and have full control as normal - so communication isn't broken and all IP's are right. I've tried rebooting everything with no luck and nothing has changed in the software. Overnight it stopped working. Hopefully there is a quick fix or a software update? I do have the driverCentral cloud driver set to autoupdate. Any help is appreciated. Don

I have a question/need some help. My dealer installed the newest version (1010) and it is working generally. However, I have 3 Kwikset locks that are reporting battery levels of n/a. I also have 3 axxess motion sensors that are now showing up but the battery levels aren't being reported. We even updated the axxess to the latest version of their driver. Reboots. Updated C4 to the latest sub-version. Reboots. Nothing. Screen shots attached. Any suggestions are appreciated...

This is the problem I'm trying to solve. Cinegration mentioned the new version of the driver would be on drvivercentral.io but it is not yet.. Where can I find it? I'm paid for the driver and I can't get one that sees my Axxess motion sensors. Please...?

Where can we find the newest version of this driver?

So, do you think there's a possibility you can post the driver here? We looked on drivercental.io and the revision history only has version 1002 when you even posted 1003 here. I'm a paid customer of this driver and would like to get the newest version as even the 1003 version wasn't detecting my axxess motion sensors. You've moved away from houselogix so it won't auto-update? But if you can post it here I can get my dealer to install it. Please...?