Jump to content

Mike154

c4Forums Member
  • Content Count

    4
  • Joined

  • Last visited

  1. Mike154

    240v Projector Screen Control

    Hi all, I've still not solved this yet but would the Card Access Heavy Duty Power Controller not work. If there is a less clunky way of doing it it would be preferred though as I'd have to somehow box this in as it's on show where the existing cables are. https://www.control4.com/docs/product/heavy-duty-power-controller/professional-wiring-guide/english/latest/heavy-duty-power-controller-professional-wiring-guide-rev-a.pdf If there are relays that can switch 240v but be controlled by a relay from C4 device that would be a better solution if anyone could send a link if they exist. Thanks Mike
  2. Hi, I know it's a long time ago but have you still got it?
  3. Mike154

    240v Projector Screen Control

    Thank you very much for your replies. I've contacted screentechnics but I'm in the UK so not sure if I'll be able to get, at least in the timeframe required. For the other option with the relays please could you send me a link of what you would use so I can pass to the electrician and check he's comfortable with it. Thanks again Mike
  4. Hi All, I'm retrofitting C4 into an existing house and the client wants to use his existing Projector screen. I've attached a pic of the box that is currently controlling it which is all 240v. On the centre terminal blocks if you short the middle cable with the one to the left it goes up and middle with right it goes down. All the other ones I've done in the past have all had ir or RS232 control. I've also opened/closed curtains and blinds with the volt free relays on the back of a EA5 etc. I can get a Cat cable to where this box is if that helps to change this box to something with a volt free relay that then triggers the 240v switching if anything exists to do this. Apologies if these are stupid questions I've just not done it before and need to let the electrician know what I need. Thanks Mike
×