Jump to content
C4 Forums | Control4

Esteban Delgado

c4Forums Member
  • Posts

    6
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Esteban Delgado's Achievements

  1. Good morning.... I have the same equipment (Blackbird 4k 8x8 24180) and I have been looking for a Controller to integrate it into Control4 and it does not exist, so I would be very grateful if you could share your Controller so I can integrate it into my system... in advance Thank you so much
  2. Hello ... how did you get the Monoprice Matrix to work ... Currently I also have a Monoprice 8x8 matrix (Blackbird 4K 8x8 HDMI Matrix Switch with HDMI 2.0, Supports HDR, 18Gbps, 4K @ 60Hz YCbCr 4: 4: 4, 8 S / PDIF Outputs, HDCP 2.2, EDID, IR, RS-232, TCP / IP Web based GUI) and I can't get a driver be it IP or RS232, so kindly can you tell me how you control this matrix and which controller did Jtech send you? ?
  3. for a long time I have been looking for a Driver (especially IP) for my Matrix (Monoprice Blackbird 8x8 HDMI 4K Model: 24180) but unfortunately I always have to integrate it via IR into the system, which leads to many errors in practice (sometimes it works well other times not so much) Also repeatedly, I have tried to download drivers for similar matrices (I was looking for similar matrices in design) and none were successful, in fact no type of driver works for me today. In view of this post, I took on the task of verifying the info posted on the ZUUM matrix and began the search again, but this time based on the software, the RS232 commands and the IRs and I found the following: 1. http://www.zuummedia.com/product-p/h8x8e-kit1.htm (Driver IP) 2. https://www.vanco1.com/product/8x7-hdbaset-matrix-selector-switch-additional-hdmi-output/ (Driver IP) 3. https://jtechdigital.com/product/jtech-4k88-ex-0435/ (Driver Serial) to take into account among these three references: 1. They have the same remote control (so it should share the same IR codes) 2. In the Manuals of each equipment, when analyzing the Serial codes, they are the same 3. the graphical environment of the Web interface are very similar. At this moment I am waiting to schedule a visit by my technician to verify the 3 Drivers (2 Driver IP and 1 Driver Serial) and I will tell you how I am doing ... however, if someone can carry out this verification before I would appreciate it any comments about it ???
  4. Good morning ... I have the following situation to see if you can help me with the procedure to follow to control my AppleTV with Control4 Teams 1. EA3 (Brain) 2. Apple TV 4K 3. iOS App * I had my Apple TV 4k configured with TVOS 12 through the IP Version 26 Driver, which installs the Driver and the "Bridge" which is the bridge for HomeKit and worked perfectly * Update the AppleTV to the latest version TVOS13 and the integration no longer works for me * Contact my distributor to update the driver and Version 27 is installed (October 11, 2019), however when installing the latest version that includes the Bridget and entering the iOS App to enable the integration I get the following message " unable to complete apple TV integration " If someone could help me with the procedure to perform such integration, I would be very grateful Thank you so much
  5. Good morning ... I have the following situation to see if you can help me with the procedure to follow to control my AppleTV with Control4 Teams 1. EA3 (Brain) 2. Apple TV 4K 3. iOS App * I had my Apple TV 4k configured with TVOS 12 through the IP Version 26 Driver, which installs the Driver and the "Bridge" which is the bridge for HomeKit and worked perfectly * Update the AppleTV to the latest version TVOS13 and the integration no longer works for me * Contact my distributor to update the driver and Version 27 is installed (October 11, 2019), however when installing the latest version that includes the Bridget and entering the iOS App to enable the integration I get the following message " unable to complete apple TV integration " If someone could help me with the procedure to perform such integration, I would be very grateful Thank you so much
  6. perfect, perform all the procedures as you told me and it works correctly.

    Install the Blackbird Driver and the Serial over IP Driver

    however, when the system sends the command to the Matrix, the display shows an Error Message (CMD Error!) and subsequently sends the command (x input, and output), but this error delays the change of sources in time. .. is there any way to correct said error ???

    Thank you very much for your valuable help

    1. nyarjun

      nyarjun

      I cobbled together the driver for my dealer a long time ago, I will look into it and get back to you.

    2. Esteban Delgado

      Esteban Delgado

      I thank you very much for your kind collaboration

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.