Jump to content
C4 Forums | Control4

THE L1ZARD KING

c4Forums Member
  • Posts

    146
  • Joined

  • Last visited

Everything posted by THE L1ZARD KING

  1. Glad to see the “find remote” function back with these remotes. I missed that feature on my Neeo remotes. Would be curious to know why it was never added, it did have the capability to beep (when docked) if enabled. [emoji2369]
  2. @Skipper J any chance we could get an update on this bug? Thanks in advance for all the help.
  3. Hi @Jonathan, C4 Engineer , just wanted to draw your attention to this one. Thank you!
  4. Is anyone else having issues with the vertical wallpaper selection being ignore in the mobile app? Via the mobile app or Composer HE I can select the portion of the wallpaper I want for vertical orientation, however it seems to be ignored and I only get shown the center of whatever wallpaper has been set. Via the red rectangle I can tell the selection is being saved each time, because when I go back in it’s where I had last set it. It just doesn’t seem to make it to room. Also, I have noticed no difference in behavior between user uploaded or the pre-loaded wallpapers. I did a cursory search this issue but didn’t see any, if this is a duplicate please feel free to close. Director Ver: 3.2.4.615802-res App Ver: 322.21.0.1577
  5. Recently I’ve noticed that my custom wallpapers haven’t been downloading properly. I had to reinstall the C4 app on my phone and noticed they would not download. I also noticed that after a recent update to the app on my wife’s M1 MacBook Air the wallpapers disappeared and now default to the gray background as well. Another weird thing I noticed is that setting the portrait version of the wallpapers does not appear to take either, just defaults to the middle regardless. Setting it via mobile or Composer HE makes no difference. Unfortunately no amount of reboots, settings syncing, or forced navigator refreshes seemed to have an effect on this behavior. Anyone else else experiencing this or something similar lately?
  6. Oddly, I had the same issue with a 7” in-wall T3 today as well. Perhaps a OTA update, but not sure. For me it was the oldest of my 3 touchscreens. I was however able to resurrect it by performing a factory reset (pressing the pinhole reset button then followed by pressing and holding the pinhole button by the microphone at the top of the screen). It’ll flash a warning then say “erasing.” Mine then went to the setup screen like when they were brand new, but then provisioned itself, only had to setup screensaver etc. again. All other resets failed, button, POE etc., it would just sit on the splash screen where the C4 logo flips around. You might give the same a shot with yours, it worked for me.
  7. FWIW this week this issue is no longer happening to me. No changes or reboots on my side.
  8. FWIW this is no longer happening for me. Hopefully it is better for others too.
  9. You are correct, I misread the blog, only individual devices that have been favorited appear. I didn’t put that together, thank you for the clarification.
  10. Yep, it is the most commonly used devices. https://www.control4.com/blog/630/apple-watch-favorites
  11. C4 just dropped a new app and YT video to setup your Apple Watch with C4. Does anyone have an idea how/what devices get selected for displaying on the Apple Watch? Like the most frequently used etc., currently I see devices of the same type (C4 outlet) show up in one room but not others. Curious how this is done, syncing settings in the app an disabling/reenabling the Apple Watch app didn’t appear to make a difference.
  12. This is what I am experiencing. Prior to the AWS us-east-1 outage I would get it occasionally for various devices, but now I get it 100% of the time for room specific commands. The commands work, but am told the device is not responding, and always after the command is executed.
  13. I’m curious if anyone has been getting “room not responding” when issuing room specific commands to Alexa? This started happening happening on my system after the recent AWS outage in us-east-1. Oddly, whatever command is sent does work, Alexa just responds that the “room is not responding.” Device or voice scene specific commands do not exhibit this issue. All commands succeed so it’s not really a big deal, Alexa must not be receiving the ack portion of the handshake or something. I’ve disabled/re-enabled the skill, rebooted controller etc. multiple times, however the issue persists. Curious if this is happening to anyone else? Also curious if the dealer notes for the recent update this week mention anything voice assistant related?
  14. FWIW I also took part of a feedback session. I remember agreeing to be contacted for feedback but I don’t remember where exactly. It’s been a few years, perhaps after a support request or something similar. The call was scheduled and lasted almost an hour, it felt like they were taking the feedback both good/bad to heart. I would do it again if given an opportunity.
  15. What DLNA server do you use? I use Twonky, and can search from OS3.2.4 without issue.
  16. @DanITman, thanks for the suggestion, works like a charm! @chopedogg88, I tested the above via a group call to touchscreens when motion is detected, it makes the doorbell noise. If door chime is disabled then you get a ring tone like a normal intercom call.
  17. Has anyone attempted to send a Chime snapshot to a touchscreen via announcement? I was thinking that it might be nice when a motion event occurs without a button press, and in addition to the push notification with snapshot. I was able generate a link for the camera via HE. It does require authentication which I embedded in the URL for basic auth but I still get 401 (unauthenticated). The URL works with creds working in browsers just not in the announcement agent. http://admin:<pass>@<ip_address>:80/cgi-bin/viewer/video.jpg?channel=0&resolution=capability_videoin_c0_resolution&quality=10&streamid=1
  18. FWIW, I am signed up for status updates and received two emails today about the planned maintenance and ongoing issue investigation.
  19. @danlevine, It looks like Tapatalk finally released a version compatible with IPB 4.6+ on 6/18/21. Any chance we could get it installed? Pretty please. https://www.tapatalk.com/groups/tapatalksupport/tapatalk-for-ipboard-plugin-release-announcement-a-t4031-s140.html#p250628
  20. Curious low light sensing is accomplished, especially when upgrading existing switches as the top and bottom bar are no longer present.
  21. I’ve been seeing the same thing for the past couple months. Like you I haven’t migrated since there isn’t an updated protect driver.
  22. Has anyone attempted to run the iOS app natively on Macs with the M1 chip?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.