Jump to content
C4 Forums | Control4

System slow and Zigbee Issues


Recommended Posts

I've been testing the driver all day (new project, just a HC800 and the driver) with 15 second interval.

Load Average currently is 0.02 0.07 0.12. 3% CPU usage and 7% CPU

Will keep the monitor up. Unfortunately if the driver utilises such a heavy load at such a low interval i may have to increase the minimum interval to something like 2 minutes.

Your dealer will need to install the correct version of the driver that works with gmail.

Before making any changes my recommendation is to let me run my test bench controller for another few days to see if my load average on my controller increasing rises to 1.

Link to comment
Share on other sites


i've updated the driver and have optimised the code. Have reduced load average from 0.20 to 0.00-0.05 (0.05 when the driver is actually polling). Dealers can download the latest driver from our website.

Thanks Alan, Ill see if my dealer can update me. Any idea if this still has the CPU drag issue if left at 15 second poll interval after 2 days?

Link to comment
Share on other sites

I left it for two days and top gives the following on a 15 second poll. Note that 15 seconds is still a higher setting then i would use myself (i personally have it set to a minute).

Mem: 105048K used, 917932K free, 0K shrd, 3684K buff, 56480K cached

CPU: 0% usr 0% sys 0% nic 99% idle 0% io 0% irq 0% sirq

Load average: 0.04 0.03 0.05 1/84 12718

PID PPID USER STAT VSZ %MEM %CPU COMMAND

2874 1 root S 2748 0% 0% /control4/bin/sddpd

2888 1 root S 56172 5% 0% director

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.