andy.cytexone Posted January 6, 2006 Share Posted January 6, 2006 Courtesy of maxspivak:I suspect you all have seen these in training. But I found these diagrams very useful:* Wireless Distributed Audio - http://www.control4.com/documents/technotes/0004-04.htm'>http://www.control4.com/documents/technotes/0004-04.htm* Wired Distributed Audio - http://www.control4.com/documents/technotes/0005-04.htm'>http://www.control4.com/documents/technotes/0005-04.htm* Wireless Zigbee Lighting - http://www.control4.com/documents/techn … 06-04.htm.This diagram shows Mini Touch Panel acting as a controller. Currently, Mini Touch Panel does not include controller functionality, and one of the standard controllers (Media Controller, HomeTheater Controller, Receiver Controller) is required.* Wired Ethernet Lighting - http://www.control4.com/documents/technotes/0007-04.htmThis diagram shows Mini Touch Panel acting as a controller. Currently, Mini Touch Panel does not include controller functionality, and one of the standard controllers (Media Controller, HomeTheater Controller, Receiver Controller) is required.* Home Theater (C4 Receiver) - http://www.control4.com/documents/technotes/0008-04.htm (of course the receiver is no longer a planned product, but you get the idea)* Home Theater using your receiver - http://www.control4.com/documents/techn … 09-04.htm. This scenario would also work if you have the Media Controller.* High Voltage Relay - http://www.control4.com/documents/technotes/0012-05.htmCheers,Max Link to comment Share on other sites More sharing options...
JAVSystems Posted November 21, 2007 Share Posted November 21, 2007 SO my question is... on the 0004-04.htm page - what is an Audio Point? Is this a new product leak or was it an old product???http://www.control4.com/i/dealer/diagrams/wireless-audio.jpg Link to comment Share on other sites More sharing options...
danlevine Posted November 21, 2007 Share Posted November 21, 2007 An audio point is a Speaker Point Link to comment Share on other sites More sharing options...
RyanE Posted November 22, 2007 Share Posted November 22, 2007 Yeah, I think that was kicking around as a name for the SpeakerPoint a *long* time ago.RyanE Link to comment Share on other sites More sharing options...
slemay Posted November 27, 2007 Share Posted November 27, 2007 No - you're both wrong... an Audio Point was actually a device that was a basically a SpeakerPoint without the Amp, but with more inputs and it had digital outputs as well as RCA / stereo. It never came to production though (as I'm sure you already know). Link to comment Share on other sites More sharing options...
RyanE Posted November 28, 2007 Share Posted November 28, 2007 Wow.I'm impressed, Shawn.RyanE Link to comment Share on other sites More sharing options...
slemay Posted November 28, 2007 Share Posted November 28, 2007 Did I mention I was a dealer 6 months before anything even shipped? We studied the products inside and out while we waited... hehehehe Link to comment Share on other sites More sharing options...
wingzz Posted November 28, 2007 Share Posted November 28, 2007 it there a standard connection diagram for hooking up the C4 Dual tuner?? Link to comment Share on other sites More sharing options...
slemay Posted November 29, 2007 Share Posted November 29, 2007 Umm... hook up both sets of RCA outputs to your amp? Your done. Link to comment Share on other sites More sharing options...
wingzz Posted November 29, 2007 Share Posted November 29, 2007 Umm... hook up both sets of RCA outputs to your amp? Your done. Thanks, I wasn't sure if it could send the channels out via Ethernet, Link to comment Share on other sites More sharing options...
zipperman19 Posted November 30, 2007 Share Posted November 30, 2007 What do you mean by send the channels via Ethernet? You can plug the tuner outputs to a MC (or HTC) line inputs. Then go from that controller's outputs into the amp. This would allow you to stream the tuner to other C4 devices and play it through distributed audio amps. Link to comment Share on other sites More sharing options...
slemay Posted November 30, 2007 Share Posted November 30, 2007 Wingzz - no the Ethernet port is just for communication with the system (ie: changing the channel, firmware updates etc...). If you get the XM Tuner - it'll also provide 2-way communication (ie: artist / song title). That's it. Link to comment Share on other sites More sharing options...
wingzz Posted November 30, 2007 Share Posted November 30, 2007 Wingzz - no the Ethernet port is just for communication with the system (ie: changing the channel, firmware updates etc...). If you get the XM Tuner - it'll also provide 2-way communication (ie: artist / song title). That's it.Got it ThanksAnother question, if I plug both rca outs (from the tuner) into the 2 MC rca in's will I be able to send the audio to the speakerpoints I have or do I still need to run it through my amp?? Link to comment Share on other sites More sharing options...
zipperman19 Posted November 30, 2007 Share Posted November 30, 2007 Got it ThanksAnother question, if I plug both rca outs (from the tuner) into the 2 MC rca in's will I be able to send the audio to the speakerpoints I have or do I still need to run it through my amp??That's what I was trying to say. You can plug both rca outs into the 2 MC rca in's and you will be able to send the audio to the speakerpoints and select two different channels at once. Link to comment Share on other sites More sharing options...
wingzz Posted November 30, 2007 Share Posted November 30, 2007 Got it ThanksAnother question' date=' if I plug both rca outs (from the tuner) into the 2 MC rca in's will I be able to send the audio to the speakerpoints I have or do I still need to run it through my amp??[/quote']That's what I was trying to say. You can plug both rca outs into the 2 MC rca in's and you will be able to send the audio to the speakerpoints and select two different channels at once.Thanks,I just wanted to be sure Link to comment Share on other sites More sharing options...
bandt90 Posted September 21, 2010 Share Posted September 21, 2010 Are these diagrams available anywhere else on the web? They are no longer at the locations listed. Link to comment Share on other sites More sharing options...
R_Willis Posted September 21, 2010 Share Posted September 21, 2010 I have most of them saved, if needed. Link to comment Share on other sites More sharing options...
bandt90 Posted September 22, 2010 Share Posted September 22, 2010 Would it be possible for me to get the ones that you have saved, I am mostly interested in the * Wireless Zigbee Lighting - http://www.control4.com/documents/techn … 06-04.htm.This diagram shows Mini Touch Panel acting as a controller. Currently, Mini Touch Panel does not include controller functionality, and one of the standard controllers (Media Controller, HomeTheater Controller, Receiver Controller) is required.* Wired Ethernet Lighting - http://www.control4.com/documents/technotes/0007-04.htmThis diagram shows Mini Touch Panel acting as a controller. Currently, Mini Touch Panel does not include controller functionality, and one of the standard controllers (Media Controller, HomeTheater Controller, Receiver Controller) is required.* Home Theater (C4 Receiver) - http://www.control4.com/documents/technotes/0008-04.htm (of course the receiver is no longer a planned product, but you get the idea)It would be greatly appreciated. I am in the designing phase of a new home and was thinking about incorporating C4 in my house while the house is all studs and wiring is being pulled. Link to comment Share on other sites More sharing options...
Gene Posted September 22, 2010 Share Posted September 22, 2010 I have most of them saved, if needed.Yes, I would be interested in them also if possible. Anyway someone can e-mail them to me or post them? Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 22, 2010 Share Posted September 22, 2010 They could very easily be added to that WIKI over at www.c4diy.com/wiki.Then the whole community can have easy access to them. Link to comment Share on other sites More sharing options...
Gene Posted September 24, 2010 Share Posted September 24, 2010 I think posted it to the wiki would be a great idea... Just have to find someone who has the diagrams and is willing to post them! Link to comment Share on other sites More sharing options...
R_Willis Posted September 29, 2010 Share Posted September 29, 2010 Uploaded some stuff: http://www.c4diy.com/wiki/index.php?title=Special:ListFilesHave tons more. Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 29, 2010 Share Posted September 29, 2010 Anybody looked at this one?http://www.c4diy.com/wiki/index.php?title=File:Wired-ethernet-lighting.jpgThe dreams of the system working that were went away about 5 years ago....very old doc. Thanks for uploading all these though. The more the better! Link to comment Share on other sites More sharing options...
CFUG Posted September 29, 2010 Share Posted September 29, 2010 Wouldn't have been so bad going ethernet... Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 29, 2010 Share Posted September 29, 2010 I agree...at least as an option.In 15 years we'll probably all be participating in studies about cancer caused by excess exposure to Zigbee Radio Waves =) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.