Mohanad Fahed Posted August 10, 2015 Share Posted August 10, 2015 hi, i have HC-200 and i want to fix Zigbee switches or Z-wave in my home,please is there any dongle or another devise to connect with HC-200 to control this switches ? Link to comment Share on other sites More sharing options...
mstafford388 Posted August 10, 2015 Share Posted August 10, 2015 Do you have a Control4 project set up on that HC-200 or other controller? are the zigbee switches you're talking about Control4? If you're trying to control other switches you'll most likely need some type of device to interface through if it is possible at all. what that is depends on what exactly you're trying to control. Link to comment Share on other sites More sharing options...
Cyknight Posted August 10, 2015 Share Posted August 10, 2015 ...but it won't be a USB dongle. Link to comment Share on other sites More sharing options...
Mohanad Fahed Posted August 10, 2015 Author Share Posted August 10, 2015 I have only Hc-200 , I connect my tv,av , ... Through IR, I did not buy the switches until know , but I'll not use control4 switches.So please what is the device I have to buy ? So I can have Zigbee? And control this switched through HC-200? Link to comment Share on other sites More sharing options...
Cyknight Posted August 10, 2015 Share Posted August 10, 2015 I'm unsure on ZigBee ability - ZWave for almost any device can be done by setting it all up on a Vera unit - and then there are drivers to integrate the Vera and all the devices you use back into control4. Mind you - unless you can manage to do most of the work yourself, chances are you'll be just as if not less expensive by using Control4 devices/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.