Jump to content
C4 Forums | Control4

HC-300 Power Supplies & capacitor plague


zaphod

Recommended Posts

Anyone else come across an HC-300 power supply that appears to have suffered from capacitor plague?  I bought an HC-300 on eBay that was DOA.  But I was able to ascertain that the problem was with the power supply and it works fine with a new power supply installed.  The bad power supply was made by Dongah, and is dated 2008-06-30.  The reason that I suspect capacitor plague is that a couple of the electrolytic capacitors on the PS are bulged out at the top.

Link to comment
Share on other sites


Caps can dry up and fail even if they don't bulge.  They can also take out other components when they fail, so that even replacing the caps won't necessarily fix the issue.

Speaking of caps, I replaced 2 caps on my webserver's motherboard 2 weeks ago.  Fixed the problem.

RyanE

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.