thegizzard Posted January 20, 2019 Share Posted January 20, 2019 1 hour ago, Amr said: Am upgrading my system piece by piece, audio, HDbaseT matrix, etc. and this have a lot of reprograming. I found each time I do a controller reboot the Driver becomes invalid for the NVR, nothing happened to the fixed cams driver ... Were you able to activate the driver? Mine is also showing license status invalid. v2.0.7 shows license status Activated. Quote Link to comment Share on other sites More sharing options...
Amr Posted January 20, 2019 Share Posted January 20, 2019 Yes, I just retype the last character from license key and press Go/Enter on keyboard and it will work just make sure ... Quote Link to comment Share on other sites More sharing options...
Amr Posted January 20, 2019 Share Posted January 20, 2019 I believe it has to do with Houselogix/Blackwire selection, for some reason it gives invalid from 2.0.9, hope we get this replicated and fixed ... My main controller is HC-800 thought ... Update >> It was updated to 2.0.11, it will try that now ... Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 My main controller is also HC-800. Blackwire designs gives me unauthorized license. Houselogix gives Invalid license. But version 2.0.7 of the driver shows Activated under HouseLogix. Mitch, is there a problem with the license keys? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 20, 2019 Author Share Posted January 20, 2019 No problem I am aware of. Turn on debug. Attempt to activate it again and send me the lua outputSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 I just sent you my debug output in a private message. My license key is in the output. It seems to think my key is invalid as best I can tell from the output. But that same license key is valid on version 2.0.7. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 20, 2019 Author Share Posted January 20, 2019 1 minute ago, thegizzard said: I just sent you my debug output in a private message. My license key is in the output. It seems to think my key is invalid as best I can tell from the output. But that same license key is valid on version 2.0.7. I have no message from you...please email it to mitch@greenfieldsolutions.site Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 1 minute ago, msgreenf said: I have no message from you...please email it to mitch@greenfieldsolutions.site Sent. Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 I just sent you the 2.0.7 output which activates and the 2.0.11 output which returns unauthorized. Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 Sorry All. I was trying to use my Camera License with the NVR driver. Mitch, I was able to upgrade from 2.0.7 to 2.0.9 for the camera driver. Activation is now fine. Can you tell me if you have fixed motion detection? I have it activated in camera but the driver is showing motion detection as off. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 20, 2019 Author Share Posted January 20, 2019 11 minutes ago, thegizzard said: Sorry All. I was trying to use my Camera License with the NVR driver. Mitch, I was able to upgrade from 2.0.7 to 2.0.9 for the camera driver. Activation is now fine. Can you tell me if you have fixed motion detection? I have it activated in camera but the driver is showing motion detection as off. Sweet! Glad you got that sorted. Here is the predicament i have. In newer firmware the way that I was doing motion detection is not able to be real time. It now requires polling. While we had a working version of that we didn't release it because if motion detection is something that takes over 30 seconds to poll and get to me that defeats the purpose so I have declined to release something like that. I have one other idea for real time motion but I am kinda stuck and really need to get some help to finish it. Quote Link to comment Share on other sites More sharing options...
thegizzard Posted January 20, 2019 Share Posted January 20, 2019 Is this thread of any help? https://community.openhab.org/t/amcrest-ip-camera-motion-detect/21018/5 Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 20, 2019 Author Share Posted January 20, 2019 It is not. C4 does things differentlySent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Amr Posted February 13, 2019 Share Posted February 13, 2019 msgreenf are we migrating to Blackwire or what are the choices for HouseLogix buyers? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted February 13, 2019 Author Share Posted February 13, 2019 2 minutes ago, Amr said: msgreenf are we migrating to Blackwire or what are the choices for HouseLogix buyers? there is nothing to migrated...HouseLogix will still run the license servers..they are not shutting those down. Quote Link to comment Share on other sites More sharing options...
Amr Posted February 13, 2019 Share Posted February 13, 2019 But for the future versions, where we can download them? Quote Link to comment Share on other sites More sharing options...
msgreenf Posted February 13, 2019 Author Share Posted February 13, 2019 Just now, Amr said: But for the future versions, where we can download them? the version blackwiredesigns.com is the same; and you can download and use that. Quote Link to comment Share on other sites More sharing options...
thegizzard Posted June 20, 2019 Share Posted June 20, 2019 Just checking in on this. I have 2 more amcrest cameras and motion detection would be great. Sent from my SM-N950U using Tapatalk Quote Link to comment Share on other sites More sharing options...
msgreenf Posted June 20, 2019 Author Share Posted June 20, 2019 No prospect for resolution currentlySent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted June 22, 2019 Share Posted June 22, 2019 On 2/13/2019 at 9:55 PM, msgreenf said: there is nothing to migrated...HouseLogix will still run the license servers..they are not shutting those down. Mitch, Went to use the rename driver yesterday and had to delete the last number and put back in to get the licence to activate. Still shows as houselogic Quote Link to comment Share on other sites More sharing options...
Amr Posted June 22, 2019 Share Posted June 22, 2019 I have this issue, most HouseLogix drivers after a controller reboot require reactivation, a total pain in the neck and I hate this shit, but who to ask? It’s a dead end, I will for sure lock for alternative solution, I wish all developers migrate to Central.IO much stable never requires re-activation! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.