D-One Posted June 29, 2017 Share Posted June 29, 2017 Hi I am using a zigbee keypad, and trying to get an LED on a button to indicate a room's audio state - on/off. I've tried using POWER_STATE in room variables and change the LED when the room powers down. But I can't get the LED to hold the status of the room. It changes when the room changes, but then goes to "off colour". Is there a method that I am missing? Link to comment Share on other sites More sharing options...
knowitall Posted June 29, 2017 Share Posted June 29, 2017 Goto the button in design and change its behavior to programmed not push/release or follow Link to comment Share on other sites More sharing options...
D-One Posted June 29, 2017 Author Share Posted June 29, 2017 Thanks. It's already set to programmed. The feedback works for about a second, then reverts. What would the best practice be for tracking a room's audio state? Room Variables, POWER_STATE? Link to comment Share on other sites More sharing options...
knowitall Posted June 29, 2017 Share Posted June 29, 2017 Is it an audio only zone? No tv? when room turns on set led to xxxx when room turns off set led to xxxx Link to comment Share on other sites More sharing options...
mstafford388 Posted June 29, 2017 Share Posted June 29, 2017 when audio selection in living room changes If living room is on -> set current LED to red If living room is off -> set current LED to black Link to comment Share on other sites More sharing options...
eddy.trochez Posted June 29, 2017 Share Posted June 29, 2017 This script will take care of both On and Off states. It'll only work when music is selected, assuming you're using Control4 Services. I won't work for Watch activities. https://1drv.ms/i/s!AklID3hP6ZZIqm2R1_OKViXzK4FV Link to comment Share on other sites More sharing options...
D-One Posted July 2, 2017 Author Share Posted July 2, 2017 Thanks so much for the input, I'll go to site and give it a go tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.