avittech Posted September 13, 2017 Share Posted September 13, 2017 sold Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 13, 2017 Share Posted September 13, 2017 $1,000 for everything? If so, I’ll take it. Your post is confusing Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
avittech Posted September 13, 2017 Author Share Posted September 13, 2017 sorry about that. was just showing original cost and part#'s included yes, $1000 + shipping for all Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 14, 2017 Share Posted September 14, 2017 Okay. Where is it shipping from? Is there anything wrong with it?Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
ILoveC4 Posted September 14, 2017 Share Posted September 14, 2017 Is this the Control4 branded unit? Do you know when it was sold new (for warranty purposes). Is it just 1080p, or does it do 2k/4K?Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
knowitall Posted September 14, 2017 Share Posted September 14, 2017 That is not at C4 unit and is 1080p Link to comment Share on other sites More sharing options...
avittech Posted September 14, 2017 Author Share Posted September 14, 2017 C4 owns leaf and originally sold the leaf branded units before branding them as C4. Yes, it is 1080p Link to comment Share on other sites More sharing options...
avittech Posted September 14, 2017 Author Share Posted September 14, 2017 There is no warranty left on the unit and yes it does work fine. Was traded in to upgrade to 10x10 4K matrix. Link to comment Share on other sites More sharing options...
CEO Posted September 22, 2017 Share Posted September 22, 2017 PM sentSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
knowitall Posted September 23, 2017 Share Posted September 23, 2017 C4 acquired leaf in 2015, long after that matrix was designed/produced/sold Link to comment Share on other sites More sharing options...
avittech Posted October 5, 2017 Author Share Posted October 5, 2017 The serial should be straight through. Here is the manual - https://www.dropbox.com/s/qrd5kxlx8ecn1at/Leaf_ZLE-LTHDMI88E.pdf?dl=0 3.8 RS232 Serial Control connectors The unit can be controlled by serial commands through the RS232 input port. Typically this would be connected to a control system with a straight through DB9 Male to Female RS232 lead. Some control systems may require only the TxD, RxD and Gnd wires of an RS232 lead to be connected. The pin configurations of these 3 connections on the DB9 plug is: TxD = Pin 2, RxD = Pin3, Gnd = Pin5. 3.8.1 Single LTHDMI88/E use The RS232 Input port is used for controlling the unit. The TERM (Termination) switch (ref: para 3.10) must be set to ON (Up). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.