Jump to content
C4 Forums | Control4

Remote dealer


Ingoiolo81

Recommended Posts

Hi, 

my dealer has gone out of business, I would need a remote dealer for a few quick things please:

* system update to enable Amazon Alexa

* installation of Yale driver and integration of connected lock (already installed with zigbee module). I also have a Yale connected alarm system, can it be integrated too?

* Ring doorbell - can this be integrated yet? In an ideal world I would like motion/rings to start a PiP image of the front door for 30 seconds if any TV is on, but i guess this is expecting too much?

PS: if there is any London based dealer, `I will also need some on site assistance soon

Thanks, 

E

Link to comment
Share on other sites


PS: a second best option for the Ring question - I also have wired CCTV covering the same front door area. The video feed from that camera is already integrated into C4, so I guess if we could get that video triggered into a short term PiP by Ring motion/rings, it could also achieve what I want (sort of)

I’ve seen that there is a BlackWire driver that might help with this

Link to comment
Share on other sites

  • 3 months later...
10 hours ago, Matt Lowe said:

there are lots of way to do it but it all depends on your hard ware.

What would be the best way to do it if I have the following setup?

  • Sattelite receivers are connected to Atlona HDMI matrix.
  • IP Cameras connected directly to the switch using Hikvision NVR.
  • Doorbird.

I have a simple program, whenever the Doorbird button is pressed:

  • Snapshot the room.
  • Execute announcement to the ceiling speakers.
  • Using Navigator agent, route one of the Hikvisions camera stream to the TV.
  • Recall the snapshot.

I'm looking to do the same but PIP the Hikvision camera or the Doorbird camera.

 

 

Link to comment
Share on other sites

6 hours ago, Zuhair said:

What would be the best way to do it if I have the following setup?

  • Sattelite receivers are connected to Atlona HDMI matrix.
  • IP Cameras connected directly to the switch using Hikvision NVR.
  • Doorbird.

I have a simple program, whenever the Doorbird button is pressed:

  • Snapshot the room.
  • Execute announcement to the ceiling speakers.
  • Using Navigator agent, route one of the Hikvisions camera stream to the TV.
  • Recall the snapshot.

I'm looking to do the same but PIP the Hikvision camera or the Doorbird camera.

 

 

As far as i know PIP is not available with atlona. you would need some type of video tiler in place but it will be limited in many ways if you using the  atlona for video switching. the best you could do is connect control4 navi and use pop ups for full screen of the camera or cameras that you would want.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.