dbuono Posted February 20, 2019 Share Posted February 20, 2019 I have a Binary 100/300 HDMI matrix. When I hook up my directv to the inputs I lose the signal. Meaning, a straight run from the directv receiver to the Binary HDBaseT works great. As soon as I add the matrix in the loop, the signal is lost. The correct inputs and outputs are being selected by the controller. Any thoughts on what the issue could be? Thanks Link to comment Share on other sites More sharing options...
tcwalker5 Posted February 20, 2019 Share Posted February 20, 2019 I know nothing about the Binary matrix, but one thing that I learned from my c4 matrix is to calibrate after adding a new device. Does this translate to your situation? Link to comment Share on other sites More sharing options...
RAV Posted February 20, 2019 Share Posted February 20, 2019 DirecTV HDMI issue. Try inserting a 2x1 HDMI splitter between Matrix and DirecTV box to help establish HDMI communications properly. Link to comment Share on other sites More sharing options...
dbuono Posted February 20, 2019 Author Share Posted February 20, 2019 Finally got it working. Thanks Link to comment Share on other sites More sharing options...
Unsocialtoaster Posted February 20, 2019 Share Posted February 20, 2019 What did you have to do to get it working? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.