jamesc4 Posted February 22, 2019 Share Posted February 22, 2019 Can a project have a CA1 as the main controller and then have few more to help Zigbee signal ? basiclly need 5 SR-260’s for TVS and could use like 3 CA1 for Zigbee but would want to use also on one C4 App. Link to comment Share on other sites More sharing options...
chopedogg88 Posted February 22, 2019 Share Posted February 22, 2019 I'm pretty sure that CA1's as director do not allow for any secondary controllers. You'd have to at least do an EA1 as director and then you could have as many CA1's as you want (could be wrong, going off memory here) If it were me I'd spend the money on Control4 dimmers/keypads to get the zigbee signal to the remotes, if that's feasible from a logistics standpoint. Link to comment Share on other sites More sharing options...
msgreenf Posted February 22, 2019 Share Posted February 22, 2019 or get Z2IO.... Link to comment Share on other sites More sharing options...
mstafford388 Posted February 22, 2019 Share Posted February 22, 2019 9 hours ago, jamesc4 said: Can a project have a CA1 as the main controller and then have few more to help Zigbee signal ? basiclly need 5 SR-260’s for TVS and could use like 3 CA1 for Zigbee but would want to use also on one C4 App. You're really going past what a CA-1 is designed to do here. I would certainly get an EA controller then use a CA as additional ZServers as needed. Are you controlling anything past just the TVs in these rooms (cable boxes, blu rays, etc)? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.