Drivers
116 files
-
TCL TV ANDRIOD (Non Roku)
By One Touch
I couldn't find anything online so decided to create my own
This has all the main commands except for Discrete HDMI and Discrete Power
Tested on C845
15 downloads
0 comments
Updated
-
DirecTV Stream IR Driver
By jesseasmith
VERSION 203:
THIS IS THE MOST CURRENT VERSION OF MY DirecTV Stream DRIVER!!
This is an IR driver, designed to control the C71KW Android Boxes. This DirecTV Stream Driver improves on the databse version of the DirecTV HR24 driver in three ways.
1) Play/Pause commands are fixed on my driver. (They don't work properly on the HR24 driver. Either the Play, or Pause doesn't work, and isn't recognized by the C71KW Box)
2) There are no traditional skip buttons on the DirecTV Stream. It uses arrow left/right to jump along recordings. My driver replaces the non-functional Skip FWD/Skip Back with the appropriate left/right arrow commands.
3) The Channel # macro on HR24 sends an "ENTER" command, which causes the DTV Stream to open it's guide. I have remove this command, to ensure the DTV Stream just goes straight to the channel instead.81 downloads
0 comments
Submitted
-
TVIP SBOX v.605 IR Driver
By dmcvie
IR Driver for a TVIP 605 (MAG box).
Manual and product description can be found here: TVIP S-Box v.605 IPTV/OTT set-top box | TVIP set-top boxes
Most functions are included, however the provided remote is pretty limited and the navigation model is not very mature. Hope you can get some use out of it, or at least use it as a good starting point.
20 downloads
0 comments
Submitted
-
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
TV_IR_LG_60PA5500 [IR].c4i
By StroTek LLC
This will handle power on/off volume and hdmi switching, but NOT webos 2.0 / smart features
52 downloads
0 comments
Submitted
-
EDS Chamberlain/Liftmaster MyQ Drivers
By ericscales
EDS Controller Driver For Chamberlain®/LiftMaster®/Craftsman® MyQ®
This driver enables communication between the Control4® system and Chamberlain® MyQ® devices. It is intended to be used in conjunction with the following other EDS drivers for MyQ® Devices:
* Garage Door Opener - This driver enables Control4® integration with a Chamberlain® garage door opener
* Light Device - This driver enables Control4® integration with a Chamberlain® light device
The following devices are known to work:
* Chamberlain®/LiftMaster® MyQ® enabled door openers connected to a MyQ® gateway
* Chamblerain®/LiftMaster® MyQ® retrofit door opener connected to a MyQ® gateway
* Chamberlain®/LiftMaster® "MyQ Garage" with Virtual Garage Door Opener transmitters
* Chamberlain®/LiftMaster® MyQ® Remote Lamp Control
This is an old version and I'm unable to upload a .zip or .c4z file. Please see the following post for the new version:
http://www.c4forums.com/topic/17360-eds-myq-driver-revival-and-free/
590 downloads
- chamberlain
- liftmaster
- (and 5 more)
0 comments
Updated
-
0 comments
Submitted
-
Logitech PS3 Adapter Driver
By Cyknight
IR driver for PS3 control using Logitech adapter.
Full control - including power on/off.
Note that much like the Sony Bluetooth remote, the adapter itself does not function in some few scenario's, mainly when Playing PS1/PS2 (disc)games, reading a disc just inserted, ejecting a disk, also very occasionally when loading movie menus or right as it's exiting a game or movie. As the driver is IR and one-way, this can occasionally cause a power off command to fail.
For best result on power off, STOP any PS1/2 games and wait a second or two.
As the power off is based on pulling up a menu (same as if you use a controller), and to cover all possible menu options, the power down is SLOW to execute - don't get impatient if it doesn't shut off right away.
Please see this thread for IR placement:
http://www.c4forums.com/topic/16534-ps3-logitech-adapter-ir-bud-placement/
71 downloads
-
0 comments
Submitted
-
0 comments
Submitted
-
Telus Optik All types
By Cyknight
Driver for all types of Telus Optik Set-top boxes (PVR or non PVR, HD/Non-HD).
Listed manufacturer is Telus, driver type is Cable
65 downloads
0 comments
Submitted
-
PushingBox FREE notification driver
By C4RVA
This is a free driver that allows you to send notifications for free using the (FREE) pushingbox.com service.
127 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
EDS_C4_DirectorBackup.c4i
By ericscales
This driver enables the backup of critical files on the Control4 Director.
63 downloads
0 comments
Submitted
-
Dlinl IP Camera DSC-942L
DLink IP camera DSC-942L (consumer product, low price, also wifi, sd recording, hight & day good choice for the existing.)
140 downloads
-
avswitch_Signal_Converter
By Cyknight
Simple AV switch driver with full signal conversion. Not intended to control anything but allows one to change the output signal from any type audio or video to any other combination.
Also useful for breaking the audio path from an HDMI, forcing the system to use other paths instead.
106 downloads
0 comments
Submitted
-
Driver Bundle
Following on from thread on General Discussions.
Am unable to upload there so uploading here.
I have been working on several drivers that I have started to use in our projects as standard in new build properties in the UK.
The drivers all need a the installation of a common driver called Stonetree_Command.c4i which provides some additional Lua modules for XML parsing and SMTP negotiations over SSL.
I currently have 2 drivers in the bundle :-
Stonetree_MyMovies.c4i - This uses the MyMovies application to update the standard Control4 Media database with its meta-data. The movies can then be played in the normal way on any supported Media player.
Stonetree_SMTPClient.c4i - This allows the sending of email to many different SMTP servers supporting plain, SSL and StartTLS negotiation. The driver also uses the stand Email Notification agent to send emails but can also send Quick emails directly.
Documentation is incorporated into the drivers.
Where possible I have tried to use standard agents/features within Control4 rather than re-eventing these aspects to work specifically with my drivers eg. MyMovies works along side the standard Media management and the SMTP driver sends emails setup using the stand Email agent.
After much testing and help from others on the forum I have fixed several issues and am now happy the both work on Hc-250 and HC-800 controllers.
Thank you
David
363 downloads
0 comments
Updated
-
Stonetree_SMTPClient.c4i
By David
SMTP Client driver
Driver initially designed to work directly with Microsoft Live.com SMTP servers which use StartTLS negotiation on port 587 to upgrade a standard plain SMTP connection to TLS Version 1 and then start an SMTP conversation.
Driver extended to work with wide range of SMTP servers whether using StartTLS or direct SSL connections, normally on port 465.
Plain connections also supported.
Authentication support using AUTH LOGIN or PLAIN but also open relay for in-house SMTP servers.
Initial release just allows simple sending of basic email but would like to hear feedback on use with different SMTP servers.
Updated to include SendMail command to action sending of standard Email Notifications.
Added initial Command driver to be loaded prior to SMTP driver which includes common modules and functions.
Please remove the current SMTP driver and then load the Command driver followed by the SMTP driver.
Full instructions and release notes exist in the Documentation section of the drivers.
Thank you
David
129 downloads
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Updated
-
cable_scientific_atlanta_explorer_8300hd_v3.c4i
By danlevine
Scientific Atlanta Description Large
32 downloads
0 comments
Submitted