jittman Posted October 12, 2012 Posted October 12, 2012 about HC-250 controller 250 host not access the Internet circumstances can not programming Below is a screenshot is
pentium77 Posted October 12, 2012 Posted October 12, 2012 Don't think you can use the software in china
jittman Posted October 20, 2012 Author Posted October 20, 2012 Don't think you can use the software in chinawhy notWe have been in use
dogdvr Posted October 20, 2012 Posted October 20, 2012 He is an authorized dealer, so I am guessing 2.2.4Brent
pentium77 Posted October 20, 2012 Posted October 20, 2012 Oh I guess C4 has authorized dealers in China. Had no idea.CLUELESS!
RyanE Posted October 20, 2012 Posted October 20, 2012 China, Korea, Japan, India, most countries in North and South America, Australia and NZ, most of Europe, Russia, Turkey, etc., etc., etc...And those are the ones I can think of off the top of my head...As far as the error, I would try a few things:1) Make sure the controller has a corresponding driver in the project.2) Ensure that the controller has been identified to that driver.3) Go into Update Manager, ensure there is no update in progress. If there is, cancel it.4) Verify that the timezone and time are setup properly on the controller.These steps should take care of your problem. Otherwise, call your appropriate tech support contacts.RyanE
jittman Posted October 25, 2012 Author Posted October 25, 2012 He is an authorized dealer, so I am guessing 2.2.4Brent2.2.1
Recommended Posts
Archived
This topic is now archived and is closed to further replies.