Jump to content
C4 Forums | Control4

Using 6 button keypad as a light switch


sevendustweb

Recommended Posts

Is this possible? In other words, I can imagine my front hallway with a switch for the hallway itself, the front door light, the outdoor lights and the walkway lights. Judging from the size of a standard Control4 light switch, it seems extreme to have a bank of 4 switches lined up together.

It seems easier to use a 6 button keypad. Will this work?

Thanks!

Link to comment
Share on other sites


As long as you have C4 dimmers or switches that control those loads somewhere else.......sure

Just remember if C4 is not working u can still use those switches as normal, so be careful where you locate them,

If your going to do this I would have at least 1 switch and the keypad, this way u can always turn on an interior light if C4 is not working......just safer that way.

Link to comment
Share on other sites

As long as you have C4 dimmers or switches that control those loads somewhere else.......sure

Just remember if C4 is not working u can still use those switches as normal, so be careful where you locate them,

If your going to do this I would have at least 1 switch and the keypad, this way u can always turn on an interior light if C4 is not working......just safer that way.

Great suggestions Godzilla!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...