duck_man Posted June 19, 2014 Share Posted June 19, 2014 Recent project included power open/close windows and a steam shower. No drivers to be found, last time I checked. I used the dual relay blind/drape driver for the windows and it works fine, but It needs to be labeled to reflect that it is a window, not a blind or drape. The steamshower also works fine, but it looks like a relay, not a steam shower. So the 'pretty' isn't there, while the functionality is. Hoping someone smarter than me (or with more free time) has created a driver for these items? Link to comment Share on other sites More sharing options...
Cyknight Posted June 19, 2014 Share Posted June 19, 2014 This largely has to do with the limited number of icons available in a system at this point in time - drivers as they stand right now need to point to an icon stored on the controller, with limited options, to show anything. For right now you may want to look at: http://www.theoryav.com/category/control4/icons/ They've managed to create a reasonable workaround to change the icons - you may find what you need there (though I'm not sure as I haven't dug into it as deeply as I would like). Link to comment Share on other sites More sharing options...
wappinghigh Posted December 1, 2014 Share Posted December 1, 2014 ^ Is this situation any better with 2.6? Link to comment Share on other sites More sharing options...
msgreenf Posted December 1, 2014 Share Posted December 1, 2014 no, but it is starting to get better! the new media proxy was the start, the same concepts will come to other proxies soon (no idk the eta) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.