Jump to content
C4 Forums | Control4

Chowmain - Thor Smart Guard Remote 11


Recommended Posts



The Thor SmartBrain not only protects from surges, it also filters and cleans electrical frequency noise. The filter works both ways. Stopping noise from robbing equipment performance as well as connected devices' noise contaminating power.

SmartBrain entry level filter is a passive technology. Managing to cover a wider range of shielding to like competitors by “cleaning” a wider range of unwanted frequency noise. The filter works both ways. Stopping noise from robbing equipment performance as well as connected devices’ noise contaminating power.

The Thor Smart Guard Remote 11 driver for Control4 allows integration of the Smart Guard Remote 11 including monitoring and control over the two controlled circuits with feedback on circuit health.



Control & Feedback

  • Circuit 1 – 7 x AS/NZS 3112 sockets
  • Circuit 2 – 4 x IEC sockets

Beeper control

  • Circuit 1 & 2 – Enable or Disable

Events Triggered on

  • Circuit 1 Damaged
  • Circuit 1 Back to Nominal State
  • Circuit 2 Damaged
  • Circuit 2 Back to Nominal State
  • Circuit 1 Turned On
  • Circuit 1 Turned Off
  • Circuit 2 Turned On
  • Circuit 2 Turned Off
  • Alarm Starting to Buzz
  • Alarm Stopped Buzzing

Programming Actions

  • Turn Circuit 1 On
  • Turn Circuit 2 On
  • Turn Circuit 1 Off
  • Turn Circuit 2 Off


  • Circuit 1 Relay
  • Circuit 2 Relay



What can i use this for?

  • Automatically power on or off power amps and other AV equipment when Control4 requires them.
  • Automatically power off equipment when high or low amps is detected.
  • Power cycle a device through Control4's navigator interface.
  • Turn off all un-neccesary equipment when the security system is armed. Turn them back on when the security system is disarmed.
  • Automatically reboot a device if it is locked up (requires Chowmain ping driver)
  • Report damaged circuits and alarms

Why do you only support OS 2.6 and above?
OS 2.6 offers a superior security encryption algorithm and a new and improved driver format. We have decided to only utilise this new format to ensure that the integrity of this driver is not compromised and that we can provide the best dealer/user experience available.

What models will this work for?

This driver will work for the RF11 R model of PDU.  It may work for future models of PDU however we recommend that you utilise the trial built into the driver out prior to purchasing a licence.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...