D2S Door station programming

[diversitie]

Hi, I am a newbie and looking a programming guideline when I want to unlock the door with user code and set up intercom call on Control4 D2S door station.

Can anyone advise on this? I used to set up DoorBird but here is a bit different. What should I go to set up via Web GUI or Composer? 

[Shivam Paw]

Composer

Properties of the DS2 will allow you to choose a call group and I believe there's a setting to auto call the call group if the button is pressed.

For user codes, in the properties section you can enter some user codes. Then in programming you can program when user code X is entered do Y.

[diversitie]

9 hours ago, Shivam Paw said:

Composer

Properties of the DS2 will allow you to choose a call group and I believe there's a setting to auto call the call group if the button is pressed.

For user codes, in the properties section you can enter some user codes. Then in programming you can program when user code X is entered do Y.

Thank you!

I found it but when I programmed it is not working.

For calling to touch screen and iPhone, do I have to set up SIP or any configuration? (I added communication agent)

For user code, do I have to set up something else?

[Shivam Paw]

6 hours ago, diversitie said:

Thank you!

I found it but when I programmed it is not working.

For calling to touch screen and iPhone, do I have to set up SIP or any configuration? (I added communication agent)

For user code, do I have to set up something else?

What programming has you done

nope

You have to add it in the device properties in composer 

[diversitie]

On 8/24/2018 at 12:08 PM, Shivam Paw said:

What programming has you done

nope

You have to add it in the device properties in composer 

I entered user code in properties already and then program when pressing user code one, unlock the door, but nothing happens

[Shivam Paw]

if u execute the code with the execute button in composer does it unlock the door?

does the door unlock through c4 at all?

are u pressing the actual key button on the keypad after entering the code?

[diversitie]

On 8/30/2018 at 6:17 PM, Shivam Paw said:

if u execute the code with the execute button in composer does it unlock the door?

does the door unlock through c4 at all?

are u pressing the actual key button on the keypad after entering the code?

Ah.. yes I just found that need to press ke button after user code. Thanks!

Now I have another problem that video not show when someone press call button. The sceen showed on touchscreen but no live video. :(

 

[South Africa C4 user]

2 hours ago, diversitie said:

Ah.. yes I just found that need to press ke button after user code. Thanks!

Now I have another problem that video not show when someone press call button. The sceen showed on touchscreen but no live video.

 

Are you on the latest OS (at least OS2.10.2)? There were numerous issues with the DS2 in prior OS (For instance, I could never get video to last more than 48 hours after a reboot on OS2.10.1). Also, is the DS2 on the latest firmware and do you have the most up to date version of the DS2 driver?

[diversitie]

11 hours ago, South Africa C4 user said:

Are you on the latest OS (at least OS2.10.2)? There were numerous issues with the DS2 in prior OS (For instance, I could never get video to last more than 48 hours after a reboot on OS2.10.1). Also, is the DS2 on the latest firmware and do you have the most up to date version of the DS2 driver?

The system is 2.10.3 and D2S firmware is 2.19.5.28.12 (press updated firmware already).

Actually, I can see video calling since the set up and then few weeks after I showed to client how it works, it was gone. Already restarted D2S, EA3, auto config pressed...

[South Africa C4 user]

30 minutes ago, diversitie said:

The system is 2.10.3 and D2S firmware is 2.19.5.28.12 (press updated firmware already).

Actually, I can see video calling since the set up and then few weeks after I showed to client how it works, it was gone. Already restarted D2S, EA3, auto config pressed...

That all sounds good. What is the DS2 driver version?

[diversitie]

11 hours ago, South Africa C4 user said:

That all sounds good. What is the DS2 driver version?

it is 221 version.

I wondered what I could have on WEB GUI, it seems to be complicated and I did nothing on it. Is it the same as D2S properties on driver?

All I need is just a video calling and unlock Baldwin door lock from its keypad.

[South Africa C4 user]

6 hours ago, diversitie said:

it is 221 version.

I wondered what I could have on WEB GUI, it seems to be complicated and I did nothing on it. Is it the same as D2S properties on driver?

All I need is just a video calling and unlock Baldwin door lock from its keypad.

I would update to the latest driver.  I am on 227.  There were issues with this at one stage.  I think by 223 or 224, thes issues were fixed.  I’m not even sure if 227 is the latest...

[diversitie]

On 9/8/2018 at 5:22 PM, South Africa C4 user said:

I would update to the latest driver.  I am on 227.  There were issues with this at one stage.  I think by 223 or 224, thes issues were fixed.  I’m not even sure if 227 is the latest...

How could I update the driver?

[msgreenf]

A dealer will need to do so. I also recommend updating to control4 os 2.10.4 so you can take advantage of intercom anywhere

How could I update the driver?

Sent from my Pixel 2 XL using Tapatalk

[suastegui]

A dealer will need to do so. I also recommend updating to control4 os 2.10.4 so you can take advantage of intercom anywhere


Sent from my Pixel 2 XL using Tapatalk

thanks, I updated it and it has new functions



Enviado desde mi iPhone utilizando Tapatalk