alanchow Posted July 30, 2020 Share Posted July 30, 2020 Chowmain - Lightwave RF Driver for Control4 Over the last decade, Lightwave has helped pioneer a revolution in home heating, lighting and power control: the ‘smart home’. Just a few years ago, the idea that your home could be enhanced by smartphone apps or voice control may have seemed out of reach, but with Lightwave it is here today. Lightwave devices look smart and act smart. Behind the sleek exterior, built-in wireless technology allows all of our devices to communicate, via the Lightwave Link Plus hub Lightwave is a modular system, so you can start with just a single device, or control a whole appartment suite. All you need to get started is their smart hub: the Link Plus Lightwave is simple to install as it is based on ‘retrofit’ technology which uses the same wiring and backboxes as standard fittings. Once installed, dimmers and sockets can be operated using traditional manual buttons as well as bi-directional control through Control4 using the Chowmain Lightwave driver. Driver Features Automatic import and naming of Devices Bi-directional control & feedback Supported Devices (but not limited to) Smart Dimmer (UK 1 Gang) Smart Dimmer (EU 1 Gang) Smart Dimmer (UK 2 Gang) Smart Dimmer (EU 2 Gang) Smart Dimmer (UK 3 Gang) Smart Dimmer (UK 4 Gang) Smart Mini Relay Smart Relay (3 Gang) Smart Socket (EU 1 Gang) Smart Socket (UK 2 Gang) Magnetic Trigger Home Thermostat Honeywell Smart Radiator Valve HR91 Smart Radiator Valve FAQ Why is this product so exciting? Lightwave provides some pretty unique devices for the UK and EU markets. For example they have recessed in-wall outlets with both EU and UK plugs. It also provides wireless battery operated raditator valve control as well. See brochure below for information about Lightwave products. Brochure & Cases Studies PDF Download How does Lightwave Work? Lightwave utilises proprietary RF to communicate between their devices. The Lightwave Link Plus hub allows communiction of their devices with the outside world. Lightwave provided us with some training slides that help explain the fundamentals of their product. Lightwave Pro PDF Download Does this driver work with v1 devices? The Link Plus hub integrates the v1 devices and as such our driver works with the v1 devices. The driver does not integrate the older hub. Is there anything we need to be made aware of? The driver requires internet connectivity for control as it communicates via the Lightwave RF cloud servers. How do i become a Lightwave recommended installer? Lightwave's established network of PRO installers are experts on how to install and configure Lightwave products. If you are a qualified electrician who is looking to broaden your home automation offering, you can sign up for the next free training webinar and be eligible to become a Lightwave PRO. See PDF for more information Where can i buy this product from? You can purchase lightwave from the following retailers EU / DUBAI Apple Store Amazon Tink Vattenfall Bauhaus Lightwave UK Apple Store Amazon John Lewis Currys PC World ScrewFix Costco BT Shop B&Q Wickes Selfridges & Co Stormfront Robert Dyas ao.com Lightwave You can also purchase the product from the following UK wholesalers CEF Rexel Edmundson Electric Center Medlock Alternatively you can search for your local stockist I want to try this driver out before buying it? All Chowmain drivers for Control4 come with a 90 day trial. Just add the driverCentral licencing driver and this driver and you're good to go. No registration required. Quote Link to comment Share on other sites More sharing options...
3D - Benn Posted July 30, 2020 Share Posted July 30, 2020 I've done a lot of projects with the gen1 kit and the old EV drivier. Great to see I can finally offer gen2 integration. The gen1 had lack of 2way feedback and reliability issues, from what I've installed so far the new stuff seems to have resolved both those issues. Also - even more of a bonus is the TRVs. Nice one Alan alanchow 1 Quote Link to comment Share on other sites More sharing options...
alanchow Posted July 31, 2020 Author Share Posted July 31, 2020 12 hours ago, 3D - Benn said: I've done a lot of projects with the gen1 kit and the old EV drivier. Great to see I can finally offer gen2 integration. The gen1 had lack of 2way feedback and reliability issues, from what I've installed so far the new stuff seems to have resolved both those issues. Also - even more of a bonus is the TRVs. Nice one Alan I agree. The power points and radiator valves are really exciting as there arn't any great solutions for this in Control4! We've worked hard with the Lightwave guys on this and from our tests it works really well. I'm actually really surprised at how affordable and accessible their products are as well. This is definately a great retrofit lighting/power/hvac solution for UK and EU customers. Quote Link to comment Share on other sites More sharing options...
tdougray Posted August 1, 2020 Share Posted August 1, 2020 Alan are the magnetic trigger sensors supported with this driver? Quote Link to comment Share on other sites More sharing options...
alanchow Posted August 1, 2020 Author Share Posted August 1, 2020 1 hour ago, tdougray said: Alan are the magnetic trigger sensors supported with this driver? Unfortunately not. At present we have to poll for feedback. As such we don't get status for upto 30 seconds. We have requested that the lightwave guys upgrade their API to provide us with instant feedback. If this happens we will of course upgrade the driver to suit. They seem pretty invested so i'm sure something will happen at some point. tdougray and Andy 2 Quote Link to comment Share on other sites More sharing options...
alanchow Posted September 11, 2020 Author Share Posted September 11, 2020 UPDATE Thanks to an API upgrade we now don't need polling. The driver has been upgraded and feedback is now instant 3D - Benn 1 Quote Link to comment Share on other sites More sharing options...
alanchow Posted September 24, 2020 Author Share Posted September 24, 2020 On 8/1/2020 at 6:40 PM, tdougray said: Alan are the magnetic trigger sensors supported with this driver? UPDATE This has now been integrated. Considering the magnetic triggers are battery operated it works really well. Think this is great for places where you can’t run cable tdougray 1 Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted March 20 Share Posted March 20 Hey Guys, Just letting you know we've released an update today which improves the connection component (by keeping the connection alive better) and some other backend changes which should improve things and improve troubleshooting.. Andy South Africa C4 user 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.