We use the Cinegration driver to control our Somfy shades. We also have in-wall Somfy remotes installed. Thus, the open/closed status tracked by the Cinegration driver frequently gets out of sync. This is not a problem for us, since we don't rely on the driver's status in any way. However, it becomes a practical problem when issuing commands.
For example, every bedroom has a C4 keypad button called "bedtime." Among other things, the "bedtime" button lowers all the blackout shades in the room. However, if the driver thinks the shades are already closed, it just won't issue the "close" command to Somfy, even though the shades might very well be open.
Is there any way to get the driver to issue open and close commands, either without tracking the shade status or irrespective of the status?
Question
DLite
We use the Cinegration driver to control our Somfy shades. We also have in-wall Somfy remotes installed. Thus, the open/closed status tracked by the Cinegration driver frequently gets out of sync. This is not a problem for us, since we don't rely on the driver's status in any way. However, it becomes a practical problem when issuing commands.
For example, every bedroom has a C4 keypad button called "bedtime." Among other things, the "bedtime" button lowers all the blackout shades in the room. However, if the driver thinks the shades are already closed, it just won't issue the "close" command to Somfy, even though the shades might very well be open.
Is there any way to get the driver to issue open and close commands, either without tracking the shade status or irrespective of the status?
Thanks
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.