Mike Helprer Posted October 20, 2022 Share Posted October 20, 2022 As C4 don't support the unit any more and the PUS15 commonly fail we offer a replacement board . It takes about 30-45 to replace it and it is not a direct fit I.E. you will use only one out of the 4 corners screws and the 4 wires will have to be exposed and screws into the connectors on the board (not cilices in) we have it for the last 2-3 years and works better than the original may found in eBay PSB For Control4 C4-16ZAMSV3 Power Supply after market kit Cross# PUS15 | eBay Ac Input AC 85-264V DC 5V At 20W 0.05sec Frequency range (Hz) 47-63 hz Input current (mA) 1.0/115VAC 0.5/230VAC Inrush Current(A) Cold start: 10A/230VAC Output efficiency(TYP) 80% No-load standby (mW) ≤150mW/230VAC Quote Link to comment Share on other sites More sharing options...
Mike Helprer Posted October 20, 2022 Author Share Posted October 20, 2022 If you are a dealer and need 5 or more email us to mike@theroyalalchemist.com Quote Link to comment Share on other sites More sharing options...
Andrew luecke Posted October 20, 2022 Share Posted October 20, 2022 Whilst its worth repairing the amps, in regards to the HC300's, nobody should be repairing them at this time imho (despite their model number, keep in mind, they are OLDER than the HC250). They're from 2007 and are 5 generations behind at this point (HC300,HC250,EA1v1, EA2v2, CORE1), and you can purchase much newer models (HC800 as an example, which is obsolete and won't support the latest OS but is 5 years newer and more powerful) for less than the power supply. Most modern drivers won't support the newer HC250 series, let alone the HC300 series. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.