can i see react action on tv?

[salamdiab]

hi

i did  some scenarios of "sleep mod"

cutom button called "sleep mod"  of  turn down volume and timer of tow hours after  this time turning off my room and media  

can i see that this action start on my tv?

thanks

[timbooo]

I assume you mean you want a popup or a message of some kind. LG TVs using the Annex4 IP driver support "toast" popups. I don't think any other brands do.

[salamdiab]

8 minutes ago, timbooo said:

I assume you mean you want a popup or a message of some kind. LG TVs using the Annex4 IP driver support "toast" popups. I don't think any other brands do.

Yes you are right I want to popup a message..

My tv is Samsung qn90d 98, and i have jvc projector n9..

You mean this kind of popup , it up of the screen driver..

[msgreenf]

There is already a wake up good night agent in control4 native. Why aren't using that?

[salamdiab]

23 minutes ago, msgreenf said:

There is already a wake up good night agent in control4 native. Why aren't using that?

hi

this agent use a wake up time and a timer(fixed) of truning off 

what i realy need is like i " show a tv and i want to sleep and my tv is on, but i want to make my room  timer off when i start slepy"

bu for that is good

what realy want it is like pop up a meassge on my tv that the sleep mod is start

thanks

[timbooo]

37 minutes ago, msgreenf said:

There is already a wake up good night agent in control4 native. Why aren't using that?

As I understand it we're looking for a "sleep timer" type function. Press a button, and two hours later the room will shut off. Perhaps with some slow ramping down volume not sure about that part.

Of course, it will work just fine - I had something similar a while ago. But there's not really a way to pop up a message saying "Sleep timer activated, 2 hours to go".... "1 hour to go".... "30 minutes to go" etc, if that is what you're hoping for.

If you just want some feedback that you have activated it successfully you could perhaps flash a light, or send something simple to the TV like a mute-unmute-mute-unmute or something like that.

[salamdiab]

3 minutes ago, timbooo said:

As I understand it we're looking for a "sleep timer" type function. Press a button, and two hours later the room will shut off. Perhaps with some slow ramping down volume not sure about that part.

Of course, it will work just fine - I had something similar a while ago. But there's not really a way to pop up a message saying "Sleep timer activated, 2 hours to go".... "1 hour to go".... "30 minutes to go" etc, if that is what you're hoping for.

If you just want some feedback that you have activated it successfully you could perhaps flash a light, or send something simple to the TV like a mute-unmute-mute-unmute or something like that.

That's exactly what I did ( turning down volume for  7),  and it work super good., and even i did  a cancellation mod for sleeping mod..and it's great.

So now i understand that i can't popup a message on the tv..

Thank you for your helping 

[timbooo]

If you have an EA1 connected to the display[s], technically I suppose it would be possible to program a switch to that input and then an "Announcement" on the on-screen navigator. But it could be potentially disruptive if you were in the middle of streaming or playback.

I have never dabbled much with the Announcements agent apart from audio for doorbells. Only way to find out is to try!

https://www.control4.com/help/c4/software/cpro/dealer-composer-help/content/composerpro_userguide/using_the_announcements_agent.htm

[msgreenf]

That's what the good night agent is. It sets a sleep timer and can turn off lights in media at the end

[salamdiab]

Yes i see.  I have ea5. And on screen 

Yes you are right  to switch input

9 minutes ago, timbooo said:

could be potentially disruptive if you were in the middle of streaming or playback

 

I

[salamdiab]

2 minutes ago, msgreenf said:

That's what the good night agent is. It sets a sleep timer and can turn off lights in media at the end

Yes its good and useful for  people that start a time watching on fixed time.

But not useful  if  you  watching  at a random time watching..

 

[msgreenf]

16 minutes ago, salamdiab said:

Yes its good and useful for  people that start a time watching on fixed time.

But not useful  if  you  watching  at a random time watching..

 

Have you looked at the goodnight agent? It does exactly what you want and has a UX in the app to set a timer as long as you want and set timer length. It sounds exactly like what you want. It's not preset for a certain hour. Sorry but it sounds like you haven't looked at this capability at all 

[salamdiab]

36 minutes ago, msgreenf said:

Have you looked at the goodnight agent? It does exactly what you want and has a UX in the app to set a timer as long as you want and set timer length. It sounds exactly like what you want. It's not preset for a certain hour. Sorry but it sounds like you haven't looked at this capability at all 

can you xplain to me more , cuse i dont have "goodnight agent" i have "wake/sleep agent" 

[msgreenf]

Sleep and goodnight are teh same thing. Sorry

[msgreenf]

https://www.control4.com/help/c4/software/cpro/dealer-composer-help/content/composerpro_userguide/using_the_wakeup_agent.htm#:~:text=The Wake%2FSleep agent lets,interfaces will synchronize with Composer.

[salamdiab]

wow

its more good than i thought 

even has more thing to do

 

[msgreenf]

38 minutes ago, salamdiab said:

wow

its more good than i thought 

even has more thing to do

 

it's worth listening   I don't lead people in a bad direction...

[salamdiab]

hhhh

you are right

thanks a lot

 

[salamdiab]

On 11/2/2024 at 7:17 PM, msgreenf said:

Sleep and goodnight are teh same thing. Sorry

hi

after doing that's well ,on my "nano touch  remot" i can see the symol of "wake and sleep" and on my ipad and my pixel phone the same

but on "hallo touch remote" i cant see it , i do a refreh , and all other thing  but no help , does suport this agent?

thanks again

[IBZICON]

On 11/2/2024 at 5:25 AM, timbooo said:

I assume you mean you want a popup or a message of some kind. LG TVs using the Annex4 IP driver support "toast" popups. I don't think any other brands do.

When you refer to "toast" popups, that would be if there are Control 4 programed push notifications these would be displayed on a LG TV?  Has Annex resolved the issue that the updated driver for the current LG TV's is available for download?