The HC-800 programing was migrated over to the Core 3 by my new dealer this past spring.
Recently I added the Triad AMS 16 & PAMP 8.
Former dealer in 2015 had a music button on a Kitchen KD-120 which was programed to stream Sirus XM to the Kitchen, Keeping Room and Dining Room [Each is a separate zone from the former C4 amp and now Triad PAMP]
However, I had a KD-120 recently added to the Dinning room so I can trigger the music when I'm using that room. This programing works whereas I press the Music button in the Dining Room, the pre-set Sirus XM channel properly streams.
The Kichen has a room control driver installed within the project labeled Music (as per @Matt Lowe HE video series recommendation) and the bindings are to Kitchen and Keeping room (see below screen snip Kitchen Room Control Driver bindings). However, when I press the Kitchen KD-120 music button, Sirus XM streams also streams into the Dining room.
I'm thinking that there has to be a 'bug' someone in the Core 3 from the previous HC-800 migration (I did not use the previous C4-16ZAMSV3-B/C4 8 Zone amp with the Core 3 for distributed video until I replaced with the Triad equipment), as the Triad AMS16 was programed with all new binding connections. i.e. I did not migrate/transfer the programing from the C4 matrix to the Triad AMS 16. (I previously asked @msgreenf if matrix programing could be transferred, but I opted to start with a clean slate, as I wasn't happy with my former dealers programing).
Where else should I be looking within Composer Pro for the former binding/connection for the Kitchen to Dinner room audio programing, so I can remove this 'ghost' connection?
Should I use the debug/Lua option to trouble shoot this?
Question
IBZICON
Background information:
Former system: HC-800, C4 matrix (C4-16ZAMSV3-B) and C4 8 zone amp.
Replacement equipment: Core 3, Triad AMS 16 and Triad PAMP 8
The HC-800 programing was migrated over to the Core 3 by my new dealer this past spring.
Recently I added the Triad AMS 16 & PAMP 8.
Former dealer in 2015 had a music button on a Kitchen KD-120 which was programed to stream Sirus XM to the Kitchen, Keeping Room and Dining Room [Each is a separate zone from the former C4 amp and now Triad PAMP]
However, I had a KD-120 recently added to the Dinning room so I can trigger the music when I'm using that room. This programing works whereas I press the Music button in the Dining Room, the pre-set Sirus XM channel properly streams.
The Kichen has a room control driver installed within the project labeled Music (as per @Matt Lowe HE video series recommendation) and the bindings are to Kitchen and Keeping room (see below screen snip Kitchen Room Control Driver bindings). However, when I press the Kitchen KD-120 music button, Sirus XM streams also streams into the Dining room.
I'm thinking that there has to be a 'bug' someone in the Core 3 from the previous HC-800 migration (I did not use the previous C4-16ZAMSV3-B/C4 8 Zone amp with the Core 3 for distributed video until I replaced with the Triad equipment), as the Triad AMS16 was programed with all new binding connections. i.e. I did not migrate/transfer the programing from the C4 matrix to the Triad AMS 16. (I previously asked @msgreenf if matrix programing could be transferred, but I opted to start with a clean slate, as I wasn't happy with my former dealers programing).
Where else should I be looking within Composer Pro for the former binding/connection for the Kitchen to Dinner room audio programing, so I can remove this 'ghost' connection?
Should I use the debug/Lua option to trouble shoot this?
As allows, thank you for your advice.
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.