1949live Posted August 16, 2010 Share Posted August 16, 2010 Has anyone integrated a Russound CAV6.6 amp into a Control4 network that fully utilizes the CAV?Specifically the ability to use the CAV's IR connections to control source equipment rather than an HC200/300.Can a driver/connections be created such that commands for source/sink equipment be routed via the CAV? Link to comment Share on other sites More sharing options...
Dipster Posted February 17, 2012 Share Posted February 17, 2012 I am trying to get the same type of project going. I have a hc800 running 2.2.0 that I am trying to get to control an existing 2 cav6.6controllers/vm1/tuner system and I am unable to get the control 4 system to "control" the cav at all. Anyone done this. There has to millions of these systems out there it seems that some control4 dealer somewhere has figured this out by now!! Any help please... Link to comment Share on other sites More sharing options...
thecodeman Posted February 17, 2012 Share Posted February 17, 2012 This may help.http://extravegetables.com/products/russound-cavcamcaa Link to comment Share on other sites More sharing options...
pharmdsmith Posted February 17, 2012 Share Posted February 17, 2012 This may help.http://extravegetables.com/products/russound-cavcamcaa+1 I've used this for a customer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.