Using receivers extra audio zone output in another room?

[grayson]

I have a Denon receiver with a separate zone output that will independently play any source and has independent volume. I have this output hooked up to speakers in master bedroom.

Could anyone tell me how to set-up the project so that the receiver zone can be set up to be controlled independently from a SR250 remote in the MBR? The receiver driver has separate commands for controlling the 2nd zone and they work fine, I tested em.

Thanks.

[henniae]

The driver for the Denon would need to have the second zone programmed and the connections made in the project.

What model of Denon?

[grayson]

The driver does have the 2nd zone commands and macros set up (I did em and tested em).

It is a new Denon AVR1911. I modified the 1910 driver extensively.

[ILoveC4]

Then all you need to do is setup your end points.

[Letran]

My dealer has warned me extensively against this set up. Is there anything that I should check or look out for before I try this. I have a Yamaha HTR 6290 there is a driver for HTR 6090. The receiver has 3 zones. Any pointers or better yet anybody succesfully integrated this with C4.