rf5000 Posted March 27, 2011 Share Posted March 27, 2011 Hello All,I want to control my landscape lighting with Control4. The landscape lighting is controlled by a 12v transformer that just plugs into a normal outlet. Can I simply but this transformer on a control4 wireless switch? So when I turn that switch on via in wall Control4 touchpanel it will turn on the landscape lights? I can do this with a regualr non Control4 light switch so I'm assuming this will work. Thanks. Link to comment Share on other sites More sharing options...
wingzz Posted March 27, 2011 Share Posted March 27, 2011 yes that will work fine Link to comment Share on other sites More sharing options...
henniae Posted March 27, 2011 Share Posted March 27, 2011 You can also set a schedule in the C4 system to have them turn on at dusk and off at dawn. I have all my exterior lighting controlled by my C4 system. Link to comment Share on other sites More sharing options...
rf5000 Posted March 27, 2011 Author Share Posted March 27, 2011 Can the be done with home edition composer? Link to comment Share on other sites More sharing options...
henniae Posted March 27, 2011 Share Posted March 27, 2011 Can the be done with home edition composer?yes. Link to comment Share on other sites More sharing options...
rf5000 Posted March 27, 2011 Author Share Posted March 27, 2011 Do you know anything about integrating a nuvo audio system with contro4 Link to comment Share on other sites More sharing options...
chicagoskiguy Posted June 20, 2012 Share Posted June 20, 2012 Old thread, sorry..... I have a wireless outlet switch for landscape lighting myself. First one, all my other switches are wall dimmers/switches, and I typically use media scenes for on/off etc. I don't see the wireless outlet switch in the list for "add/remove load" in the agents tab. I can find it in the programming tab, and turn the relays on and off no problem...What am I missing? Link to comment Share on other sites More sharing options...
pharmdsmith Posted June 20, 2012 Share Posted June 20, 2012 Old thread, sorry..... I have a wireless outlet switch for landscape lighting myself. First one, all my other switches are wall dimmers/switches, and I typically use media scenes for on/off etc. I don't see the wireless outlet switch in the list for "add/remove load" in the agents tab. I can find it in the programming tab, and turn the relays on and off no problem...What am I missing?You're dealer should add two generic lights and bind them to each relay on the outlet. Then those will show up. Link to comment Share on other sites More sharing options...
chicagoskiguy Posted June 20, 2012 Share Posted June 20, 2012 Thank you for the advice, I'll give him a call! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.