Jump to content
C4 Forums | Control4

Button LED color change with toggle


Recommended Posts

With a 3 or 6 button keypad I'm using a toggle to turn on and off a switched outlet. I was able to turn the button LED green after pressing a button, but it didn't change back when pressing toggle button again.

Since it"s a toggle do I need to use a variable? Or is a better way to add programming to the switched outlet to report the state to the button LED?

Link to comment
Share on other sites


With a 3 or 6 button keypad I'm using a toggle to turn on and off a switched outlet. I was able to turn the button LED green after pressing a button, but it didn't change back when pressing toggle button again.

Since it"s a toggle do I need to use a variable? Or is a better way is to add programming to the switched outlet to report the state to the button LED?

Mine works properly, but Instead of using programing the button is binded

Link to comment
Share on other sites

^Of course that works but with a portable device like an outlet, it's not practical. AVHI, I would suggest triggering color upon switch-state. That way, no matter how that switch is activated (GUI, CHE, 6BT, 4Sight), that LED will change color.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...