Jump to content
C4 Forums | Control4

turls

c4Forums Member
 View Profile  See their activity

  • Posts

    2,004

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by turls

  1. turls
    I got upgraded to 2.10.x, and got the driver loaded successfully. I think the issue with loading drivers is specific to my system. I've had this issue for a while. Normally a reboot works to get drivers loaded, but then it eventually breaks for adding drivers again. I couldn't get this to work with 2.9.x with your driver. Thanks.
  2. turls
    Thank @msgreenf. I'll let you know if I need any help, I might wait it out a little bit. Because of the HL driver being unreliable since Day 1, I'm used to just disabling FloLogic to get past the issues, and then I forget I even bypassed it. I'll probably flood the house sometime...
  3. turls
    Ok, besides Houselogix (which I already bought), there are at least four other Rachio drivers: Alan's (no longer available, but wasn't a true driver), Epic, Annex4, and Blackwire. @Kevin L I only see you mention Houselogix, but since you are the only one mentioned officially on Rachio's page, should I assume you have a step up on any other competitors? Do you have any type of official relationship with Rachio so they will work with you on any API changes? Honestly, it was crazy I had to buy this driver once because of the limited functionality that is necessary for me. If I have to buy it again, I want it to be the last time. Thanks...
  4. turls
    I just need the Rachio driver from Houselogix to be able to tell my Flologic (water leak sensor) that I don't have a leak while the sprinklers are running. My sprinklers are not tapped in before my water leak sensor, and they shouldn't need to be. First sprinkler session of the season was a fail last night and turned off the water. But, I've fought that driver for years and it was never 100%. I have terrible luck with Houselogix support. Is anybody in active contact with them about things that broke because of the API change?
  5. turls
    The newest Oppo driver, v2.9.190, which interestingly has a different file name than a previous driver I am currently using, v1.7.167, will not load into my project. I can load the 1.7.x driver fine as a duplicate. Does the 2.9.x require C4 2.10? Or is there some other reason for this? Because I am still on 2.9.1 until I can get the HC300s removed from my project. I get "add item error" with a dialog box that says "Unable to add to [room name]"
  6. turls
    You are good! I'll try it soon and let you know how it goes.
  7. turls
    To be clear, the sequence is DIMMER , DIMMER , DIMMER , MUTE , (1,2, or 3) for Region A, B, or C, then a power cycle. Much appreciated...
  8. turls
    Yes, so I can add it to a macro preferably...would be great.
  9. turls
    I may have goofed, changing the region with the region chip requires both Mute and Dimmer commands. I thought the Dimmer command was in there, but now I can't find it. I imagine I made a mistake and it was not there, but maybe it is gone in the new version. Can you please make sure to get Dimmer added or help me find it?
  10. turls
    Annex4: Unless I'm missing something, I don't see anyway to send an IP / Serial command for "Mute" in the driver. This is needed to change Regions using the firmware mod. Is there a chance that can be added?
  11. turls
    I loaded the beta driver, and it seems I've lost IP control both through the Oppo iOS app and also with this driver. Anybody ran into that? What is goofy is the iOS app tells me i have to update to the newest driver, but it might just be saying that since it cannot connect. I don't have serial hooked up currently. EDIT: another time I should have checked before I posted, the DHCP address changed when the new firmware was loaded, even though it should have been reserved. The beta firmware and Annex driver seem fine.
  12. turls
    Any update on this? Only $30, but not wanting to waste my time on it if it won't work. Is it as simple as learning the Harmony IR codes for PS4 into a driver?
  13. turls
    Mine turned out to be a wiring issue, its working on wired now. Thanks.
  14. turls
    These are commercial. They have battery backup.
  15. turls
    I had to manually update this driver, and it was on quite a newer level. Is there any trick to getting the auto-update to work? Also, as far as the Oppo 203 is concerned, has anybody had any trouble getting it to work on a wired network? I've just left it on wireless, as it works, but I figured there was some type of firmware glitch and at this point, firmware updates have slowed down so I need to get serious about determining if I have a hardware issue or not...
  16. turls
    Was the unit out of warranty when they offered to replace? Just curious as the old model has been out a while.
  17. turls
    Can you or a user elaborate on this? I've been burnt on SmartThings and a third party driver for Geolocation. I want a solid solution. What makes this more reliable?
  18. turls
    Experience buttons and iOS Widgets would go hand in hand, just saying.
  19. turls
    One more thing, with the Chowmain driver, can I take my existing C4 Thermostats that are currently on 2 of my 6 zones for my Geo (and wired into the Geo controllers) and force them to talk to the IntesisBox interface instead? From my understanding the IntesisBox is all Wifi so how does that work?
  20. turls
    Everybody around here uses Mitsubishi Mr. Slim units. I've finally got enough data to realize my Geo is not sized large enough even with zones after my addition, and my ductwork is a disaster. I have two zones I need to move to ductless. What are others experiences with IntesisBox? I'm guessing my guys around here won't know anything about them, so @C4Newbie's comment has me concerned. I don't want to go through another summer with outrageous bills, so I'm going to put this on the fast track.
  21. turls
    Is there a reason Axxess is missing? I mean the driver sounds great, but I'm not sure I want to spend the money unless its comprehensive. Is other support on the roadmap? Thanks.
  22. turls
    I thought everybody just used their phones instead of touchscreens anyway
  23. turls
    I thought Amazon pretty much locked down the voice control to their own devices, so the open source versions have to have a button pressed to receive input. This seems to get around that somehow...
  24. turls
    Your trial is appreciated, but this could actually drive a Black Friday or Super Bowl timeframe TV purchase for me, and a TV is something I want to avoid returning if possible
  25. turls
    Ok, so the list of supported TVs is pretty small, what is the chance that if an LG TV has WebOS 3.0, its supported?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept