Jeffrey

Hi, I’m in need of a few legacy dimmers in white as well as a 2 button keypad if anyone has some they would like to move. Used is fine. Thanks, Jeff

So call it Closed Weather? Premium weather?

HSIM Sent from my iPhone using Tapatalk

When the system is disarmed, the security system keypad lights up every time an interior motion is triggered. It's super bright when in the bedroom and really annoying. This was not the case in the prior driver where the only thing that happened when an interior motion was triggered was that the green light turned off on the keypad.

Any chance you worked on the Snap Honeywell driver for 3.x? Got a minor gripe with it.

Anthem too. I tend to go for RS-232 control over IP if available.

What software do I need to be running for it to work? 3.3.2? Sent from my iPhone using Tapatalk

My system was recently upgraded to 3.x from 2.10 and they had to change the Honeywell HSIM driver from the outdated one to the new one. One thing that changed and is very annoying is that every time a zone is triggered whether it be from a door opening or motion triggered, the physical alarm keypad lights up. Especially annoying when one of the keypads is in the bedroom and shines a bright light every time a motion is triggered. The 2.x driver did not do this so I think it’s a bug in the new driver. Seems to be simulating a keypad button press every time a zone is triggered. I’m hoping someone from control4 will read this and look into it. I asked my dealer who immediately blamed it on the vista 20 panel. I dug out the panel manual which said there is no programming that can be done to change how the keypad lights up. Jeff Sent from my iPhone using Tapatalk

My electrician had me buy this relay for my 220 v gutter melt system Functional Devices RIB2401D Pilot... https://www.amazon.com/dp/B0078S151K?ref=ppx_pop_mob_ap_share Jeff Sent from my iPhone using Tapatalk

Siri commands work?

I'm in the same boat. Would like to get the rechargeable version and dump the AAA batteries in my 260 remote.

Haven’t heard of that one, but I use Berto Berto.io works well and the owner is super responsive for any issues. A few other guys on here use his solution as well maybe they will chime in. Jeff

Thanks! Helpful

Thanks guys. I’ll ask my electrician about getting this done.

Ok l. I don’t really understand how that works, but I can try to ask my electrician. Sounds like it steps down the voltage somehow but still allows for control via a regular switch.

Is there a switch/plug that can handle a 20 amp 240 v circuit? Getting an ice melt system installed and trying to come up with a way to incorporate into C4. I have Berto so I can go with products other than strictly C4. I’ve looked at Kasa but everything seems limited to 15 amp. Any ideas would be appreciated. Thanks, Jeff

I have a 260 with AA batteries. Are you saying they are interchangeable? I didn’t think they were. Think I’d buy a battery and cable since they seem to go through AA pretty fast.

Thanks! Great to know that.

Yeah I don't know why it isn't there. Maybe there is a way to do that. I've had little to no issues for years with this integration. I had heard people experienced trouble with it on OS 3 which is a main reason I've dragged my feet on it. But now I heard a couple people say it is working on OS 3. Every once in a while zones will stop showing up within C4 which causes any programming off this to stop working. Happens maybe once or twice a year. I just pull the power to both the panel and the controller, plug them both back in and it works fine again. Thanks, Jeff

2.10 user here with HSIM integration and I am able to arm into Night mode. It is in the "Functions" buttons and can be used from within C4 app. Thanks, Jeff

I usually unplug panel and battery then unplug C4 controller. Plug panel and battery back in then plug controller back in.

Cut power to alarm panel including back up battery. Reboot C4 controller at the same time. Should start functioning again in the app. This happens to me from time to time and above always fixes it. What OS are you on? 3.x? Jeff

Thanks! I will proceed that way. Appreciate the help.

Thanks. Will the remaining 3.5 mm analog output that I have left on my EA-3 do this ok? For some reason I thought there might be an issue mixing the digital audio (which I use to stream inside to my 5.1 setup) and analog audio streaming might not work. Not sure though.

Sorry I am confusing the subject. Forgot that C4 natively can use Amazon Music. Streaming Amazon Music is really all that we need it to do. How would that be best accomplished in my scenario? Thanks!