Jump to content
C4 Forums | Control4

enzeder

c4Forums Member
 View Profile  See their activity

  • Posts

    117

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by enzeder

  1. enzeder
    Hi, I have two hubs in the system and works fine, but I definitely did not need two email addresses. Can't remember how I set it up. Sent from my Pixel 6 using Tapatalk
  2. enzeder
    If it's a standard fibre install you should be able to plug your new router straight into the ONT and you will be good to go, shouldn't need the netcom unit. Just have to make sure you tag the WAN traffic as VLan 10. Most routers in NZ have this option in the firmware so it works with the fibre network. Same for all the providers, ie chorus and the other UFCs, in my case UFF. Sent from my Pixel 6 using Tapatalk
  3. enzeder
    Been happening to me for a few weeks, frustrating as google doesn’t get device states and I can’t change it. Sent from my iPad using Tapatalk
  4. enzeder
    Will this work with Curtain 3?
  5. enzeder
    As an aside in your original programming with tmperture high you needed to indent the notification command as you want it at the same level as the "turning the fireplace off" command. At the moment the notification is nested with the temperature change so it would send every time the temperature changed, instead you wanted it associated with turning the heater off, ie only send the message when turn the heater off Alternative to a timer is some sort of Boolean that you change when you go in and out of the zone. Then you send the notification only when the boolean changes rather than when the temperature changes
  6. enzeder
    Not sure but I got the impression Control4 nz did it, my dealer is listening post in Tauranga. Note it’s just a standard IR driver. The IRreceiver is in / behind the power button on the box. Of course no IR for the pod. Sent from my iPad using Tapatalk
  7. enzeder
    I have a SkyBox and a SkyPod working through control4. An IR driver has been created for the SkyBox and your deal should have it, works fine. No difference from I presume how you are using the existing skybox (I came from Vodafone TV). For the SkyPod I am using Chowmain's AndroidTV driver so its IP based (but also works for the SkyBox as well). Platforms :: Control4 Drivers :: Audio/Video :: Android TV (drivercentral.io) Slightly sluggish and which I suspect is more about the SkyPod rather than the driver. Although one unfortunate thing is that the driver has three control options and the fastest method doesn't seem to work (Zank Default Advanced) - the instructions note that not all devices work with the fastest control method and so I am using Zank Default. You can use the GoogleTV driver for the SkyBox as well but I haven't bothered trying (albeit the idea of getting rid of the IR buds has appeal given its one of the last two IR controlled devices I have). You could of course get the driver installed and see how you like it given Chowsoft has a 90 day free trial.
  8. enzeder
    Hi, will there be support for the Shelly Plus H&T. Thanks
  9. enzeder
    Exactly the same setup as I used in my HTPC and Nvidea Shields Sent from my Pixel 6 using Tapatalk
  10. enzeder
    When I had an OSMC Vero 4k box it worked fine. Sent from my Pixel 6 using Tapatalk
  11. enzeder
    Correct, also as an aside two unilogiq drivers for the motion sensors. Pretty straight forward to setup from what I remember, it was a while ago now.
  12. enzeder
    Yes, I have 2. One at each end of the house.
  13. enzeder
    I used to use a timer, motion triggers a timer which turns light after expiry. Now I use the C4 security light driver with the nyce selected as the movement detector
  14. enzeder
    Mine worked perfectly for a while other than some times it would say couldn’t reach C4 but it would still work. Now when I’m on wifi it still works fine, albeit a little slow sometimes, but if I’m outside wifi on mobile network I am getting the same as you, je C4 not available. it’s a bit annoying because I had just put some commands on my android auto Home Screen that worked for a few months and now they don’t. might be a firewall / router setting that somehow changed but no idea.
  15. enzeder
    Channels no although they are now the same as sky. Got a VTV driver from my dealer, they learned the various codes and I found a nice icon for them. Works well. your dealer should be able to do the same if there still isn’t an “official” driver
  16. enzeder
    Don’t have appletv but most likely answer is that as the wired connection will have different IP address to the wifi connection your driver is still pointing to the wifi connection and not the Ethernet connection.
  17. enzeder
    Nope, didn't turn it on. Although it does turn on if I cast to it. I also tried my Sony KD-65A1 and that didn't work either
  18. enzeder
    Do we have e a long press option on the new driver?
  19. enzeder
    Is this just for boxes, or does it work for Android TVs as well - thinking specially of TCL Televisions which are Android TVs in Aus / NZ rather than the Roku you see in the US.
  20. enzeder
    Latest update for the nvidea shield has added support for control4. Nothing on the nvidea forums on what this means and google not showing anything so wondering if anyone here had any idea of what they are doing?
  21. enzeder
    Mine has done the same. I originally thought it was because my HC800 died and my dealer lent me one while I wait for an EA5 but suspect now it might be a coincidence and there is something else going on. Composer says notification sent but nothing turns up or appears when look under notifications under the customer account on the internet. I have rebooted etc and no change. Dealer has a query into Control4
  22. enzeder
    I had similar issues and turned out my system was low on memory. They restarted Director and the problem was fixed. Reboot did same. Sent from my SM-T700 using Tapatalk
  23. enzeder
    There is a driver that allows you to link to a keypad so people can cycle through user selectable times, also can get keypad to automatically change colours etc. You can also program it. Sent from my Pixel 4 XL using Tapatalk
  24. enzeder
    The other thing to consider is you still might want scheduled times for typical use as unless someone remembers to turn them on well before they are going to use them they dont have time to warm up before use. Guess it depends on whether you are using to make the towels warner before use or dry them after use. You could also try the radiant floor timer. Sent from my SM-T700 using Tapatalk
  25. enzeder
    I have just has these installed as well - with the pulse automate 2. I can control them fine with the remote, I can also control them using google. Dealer has bound them all up and the driver is communicating because the feedback is getting back to the navigators correctly. But now we are stuck - they haven't installed this brand before. Problem is that the the blinds stop moving soon after starting and it seems to be the driver determining it. For example based on the LUA debug when the blinds are shut and I tell C4 to open them it sets it to go to level 95 - ie opens them 5%. Similarly when the blind is open and I want to close them it sets it to go to level 5 - ie closes them only 5%. Also how does the calibrate function work, at the moment I have widely different calibrate times which are mostly wrong - the 8,000 is the default - and not even sure how they got set. Blind 1 - 5502 / 8000 Blind 2 - 2711 / 1908 Blind 3 - 2927 / 8000 The blinds are all the same height.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept