Netcom

Thanks for the help, I just find a post with the same advice which took care of the problem.

WHat should I be looking for? I read them and tried everything I can however Im still tuck with a keypad flash in green lights.

Thanks for your help, I went through the process of putting my controller in Embernet upgrade mode. Then added the node for the 6 button Keypad The flashing process began and then said 100% complete Took controller out of Embernet and placed back in Zigbee Pro mode. All of my other devices are showing online using Zigbee Pro. The 6 Button Keypad is now flashing green every 3-5 seconds. This means Im stuck in "MINI-APP" mode. I now have to get this Keypad to "join" the mesh network. It is my understanding that Mini-App mode is exactly for this. It allows the device to join a Zigbee Pro network then once it joins the firmware will complete update to Zigbee Pro. Prior to starting this I had solid blue lights which as I understand means the device is connected to another mesh. Im still unable to get it to join the mesh when I try to identify it.

Danny, I have a HC300 along with a HC1000. I was told the keypad was Zigbee (802.15.4), Maybe simply removing the keypad from the Mesh would correct the problem. If you could find the documentation on removing a keypad from a mesh I would appreciate it.

Hello, I recently added a KPZ-6B1 6 button keypad and I can't see it when I try to idenify it. When it powers up all the lights are orang then turn blue. Im using the top left button pressing it four time to identify it but its never seen. I have 6 other dimmers / switches that are working great. Are there any step one could take to troubleshoot it? Ive rebooted everything but no luck. Thanks in advance for your hep!