paulromi

Yes besides the three

Are the user defined custom buttons available on the halo? If not, are they coming soon?

Using the TCP driver and WOL did the trick for me. It was only the discrete power on/ off that was my initial issue. Not sure if I need the movie list on my remote. I prefer the video wall to be honest.

Zidoo works well with control 4. It has Serial and IR controls and only Toggle Power commands. But you have a workaround using WOL to start it up

Battery life still appears to be of issue. After the update the Halo was fully charged. Watched about two hours of a series on the first night, same on the second night. The end of day 3 battery was low enough to warrant recharging. Will have to check how long this takes to boot up. Maybe keeping it powered off is the answer. In my circumstance it’s in a theater room so it’s not being constantly used. The software update occurred after I had my remote for only a day. Was it worse before? Did others see improvement? Hope the Touch is not having the same issues.

Awe. Too bad. Thanks for the answer.

I was thinking a single custom to bring up a list of my lighting scenes so I could scroll and select. Similar behaviour as the watch button brings up your watch activities.

Is this possible?

Does the Halo need the new Core controller in order to be compatible or will it work fine with the EA3?

My projector has multiple inputs and sometimes won’t switch to the right one. My wife can’t get stuff to work and gets mad at me and says it’s too complicated. Just want her to see a page that shows her all green icons or something

What is the best way to see current states of AV equipment. For example A custom button that shows what input the projector is on. power status of any piece of equipment I’ve seen pages that show status of garage doors / security info but what’s the best way to create this for 2-way feedback.

not sure on the ECM but the red wire coming in with the black and red leads are just coming from a standard decora switch to turn it on and off. I'm assuming I would connect those to the z2io - but can you tell me where? is it the C1, C2 etc.

Could someone please help by drawing what wires would go where between a Z2io to my fireplace. pics attached. Please be very specific.

WTB Black 7” T3 touchscreen