paulromi

Yes besides the three

Are the user defined custom buttons available on the halo? If not, are they coming soon? 

Using the TCP driver and WOL did the trick for me.  It was only the discrete power on/ off that was my initial issue. Not sure if I need the movie list on my remote.  I prefer the video wall to be honest. 

Zidoo works well with control 4.  It has Serial and IR controls and only Toggle Power commands.  But you have a workaround using WOL to start it up 

Battery life still appears to be of issue. After the update the Halo was fully charged. Watched about two hours of a series on the first night, same on the second night. The end of day 3 battery was low enough to warrant recharging.   Will have to check how long this takes to boot up. Maybe keeping it powered off is the answer.  In my circumstance it’s in a theater room so it’s not being constantly used.  The software update occurred after I had my remote for only a day.   Was it worse before?   Did others see improvement?   Hope the Touch is not having the same issues.   

Awe. Too bad.   Thanks for the answer. 

5 hours ago, Double D said:

Yes. You can label each button in the Halo driver properties.  Then use room level programming to execute an -activate lighting scene- command.  

If you want to have  a single button turn on and off a lighting scene, you can program the button to toggle a variable, the program the lighting scene to -activate on if toggle is true-  activate off is toggle is false-

I was thinking a single custom to bring up a list of my lighting scenes so I could scroll and select. Similar behaviour as the watch button brings up your watch activities.  

Is this possible?

Does the Halo need the new Core controller in order to be compatible or will it work fine with the EA3?

My projector has multiple inputs and sometimes won’t switch to the right one.  My wife can’t get stuff to work and gets mad at me and says it’s too complicated.  Just want her to see a page that shows her all green icons or something 

What is the best way to see current states of AV equipment.  For example 

A custom button that shows what input the projector is on. 

power status of any piece of equipment

I’ve seen pages that show status of garage doors / security info but what’s the best way to create this for 2-way feedback.  

12 minutes ago, Olichops said:

Depends on the fireplace and if it has an ECM to control it? I just did this on my Heat N glo that has a brown wire the just jumps to the battery pack red wire to complete the circuit and light it up.  Looks like this is a simple power to solenoid setup but only guessing by the pic. In that case just interrupt the power to the unit with the Normally open relay on the Z2IO. Acts just like a switch in this case

not sure on the ECM but the red wire coming in with the black and red leads are just coming from a standard decora switch to turn it on and off.   I'm assuming I would connect those to the z2io - but can you tell me where?  is it the C1, C2 etc.

Could someone please help by drawing what wires would go where between a Z2io to my fireplace.  
pics attached. Please be very specific.   

WTB Black 7” T3 touchscreen

17 hours ago, chopedogg88 said:

EA3 v2 doesn't have WiFi built in, requires an external adapter, which I suppose you don't have.

Trying to switch an EA3 v2 controller to wireless instead of wired.  In the network configuration wizard- wired is selected but the wireless option is greyed out.  Any suggestions?

issue that started on this box is that it keeps losing the wired connection only a restart fixes which lasts minutes or an hour at the most.   Another EA1 on the same switch works fine.  System is about 1.5 years old. No changes to network and even tried swapping the ports to both boxes.  EA1 works fine this keeps dropping. 

try on your device (app or touchscreen).  Had one do this...uninstalled the driver and tried again and it eventually showed up.  wasn't sure if device was upgrading or something but the presets eventfully showed up

I own the Lutron serena blinds and warranty & quality is great. I believe it was seven years we had an issue with one and it was replaced no hassles.

On 11/24/2019 at 11:50 AM, eggzlot said:

Drivers for global cache free?

Yes

Hi guys, looking for the up arrow button for this thermostat.   Mine has one of the circle clips broken off.    Let me know if anyone can get one for me and how much.
I messaged Aprilaire and the said go to control 4. 
 

thanks  

On 1/13/2020 at 7:07 PM, zaphod said:

Is anyone using one of these?  They appear to have a C4 driver. Would this work the same as a C4 Z2IR, other than the fact that it uses Ethernet to connect back to your controller rather than Zigbee?

I have a bunch at home that I don’t use anymore.  GC100, IP2SL(2) several itach flex with IR cables as well as serial.  Let me know if you need more we can work something out 

+1 on the shield.  I have both the apple 4K and the shield. Mini apps are great.  

I would love the ability to map your own buttons to the hard buttons.

I wasn't a big fan of the Neeo, been trying one out- but this update was big improvement.  But lets not take the foot off the gas yet.  Still not there yet. 

Yes they work great