Jump to content
C4 Forums | Control4

jillmark99

c4Forums Member
  • Posts

    407
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by jillmark99

  1. You can use the same channel for both zigbee mesh’s in the same house/project?
  2. I use an older one a Poweredge 860. I run windows 10 Pro on it with no issues. I’m not familiar with AnyDesk so I can’t comment on that.
  3. I use a dell poweredge 1U server for this. It also runs all my BI security. If you have it on rails you can even pull it out if needed. It acts as a good monitor/keyboard/mouse shelf too. Works good.
  4. Will see. Can always delete them if they don’t look good on the T3’s.
  5. I like your mock-up you posted. It looks good. I’m going to play around with it and add some background images over the holidays similar to what you have in your picture posted above.
  6. I don’t mind these basic icons. Looks better than the native squares in the app. Where did you get these basic items? I would like to add these to mine.
  7. Reviving an old thread. The link to the Yatun drivers no longer works. Is it possible someone could PM me and send me the Yatun thermostat drivers? Thank you.
  8. Contact Mike at Aries AV in Wellington Florida.
  9. What are you using to send push notifications of your cameras?
  10. I’ve been using Chowmain’s IFTTT driver for geofencing ever since follow me stopped working and I must say it works great. It’s extremely rare it doesn’t work. Everyone in our house is iOS devices. Highly recommend it. I also agree with you it would be nice to have it natively integrated into C4.
  11. They will continue to work on their own but won’t be able to be integrated with Control4 though as they have, right?
  12. This sucks. I just replaced all of my Nest protects this year because my old ones had expired. Guess it’s time to toss out all my Nest thermostats. Any issues with the ecobee thermostat with C4?
  13. 6 total. 5 plus a guest. management security video data automation
  14. Reviving an old thread here. I use 3 managed pakedge 24 port switches in my system and when I set the ports to trunk nothing works. Router LAN 1 > Port 22 Switch 1 Switch 1 SFP (port 24) > SFP (port 22) Switch 2 Switch 2 SFP (port 24) > SFP (port 22) Switch 3 When setup like this and all of the above ports are set to trunk nothing works. If I switch them all to hybrid everything works just fine. Never had any luck with trunks. Not sure why. Perhaps a pakedge expert can chime in.
  15. Thanks for all the replies. Will definitely take the advise and run some tests this week hard wired. all of my switches are Pakedge managed switches. I don’t usually do big bandwidth things on my network. Two TV’s streaming movies at the same time would usually be the max.
  16. Yes I was running the tests over wifi and I was running them all at the same time. I can plug in directly with Ethernet cable and try that as well.
  17. Hi all I (think) i'm having a network issue and I'm wondering if someone can lend a hand and help. My house network seams pretty reliable and my Control4 system is rock solid. I thought I was having issues with my ISP because every once in a while my internet drops out but after some tests today I'm wondering if its my network. I read here in a post about PingPlotter and decided to download a trial today and run some tests. I am by no means a network guy and don't know what the data output of ping plotter means so I'm wondering if someone can help interpret it for me. My setup is as follows; ISP's modem - its basic, no bells and whistles. Its just a modem and not a combo unit. Pakedge RK1 router 3 pakedge 24 port switches Modem is plugged into WAN1 on router, switch 1 (port 24) is plugged into LAN1 on router, switch 2 (port 24) is plugged into LAN2 on router and switch 3 is plugged into switch 2. All of my Control4 hardwired items are plugged into switch 3. Switch 3 is only for C4 gear, noting else. I run 5 pakedge zones to separate traffic for data, security, automation, streaming/tv, other. I also have a separate guest network. I have 3 pakedge access points all plugged into switch 2 No torrents running. No sonos devices. I ran ping plotter for an hour and I screen captured the data. It looks like every 5 minutes there is an issue and then there is a grouping of dropouts but I don't know what it means. Like I said I'm not a network person and not sure where to look. If someone is willing to look at the PingPlotter pictures attached I would appreciate it. I would appreciate any help you can give. Thanks
  18. I got one. Thanks to all that messaged me.
  19. I’m looking for a used T3 tabletop touchscreen. Would like to buy from a Canadian seller to avoid currency exchange and import fees. If you have one for sale for a good price please pm me. Thanks.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.