goldencat

Thank You Again. I know I'm Pushing it. You are not looking for field tester, are You I added UNVR on 192.168.10.8 and connection to the Control4 controller is become intermittent, It keeps dropping it. Can some one please provide an example or an idea of rule(s) on the network, I would have to create **192..1.1-10. Network equipment. **192..9.2-100... Office, House and Smart Home equipment. **192..10.2-50 CCTV Cameras 192...10.2-39 UNVR is 192..10.8 Control4 Processor 192..9.1

Thank You. It worked

Confirming: I can't ping UDM (Router) From Control4 Processor. My head is exploding. I can ping UDM from my PC . PC and processor sitting on very similar scenarios Same network, Wired, same port setting, Processor on static IP, My PC on DHCP.

You are right, I can't ping it from processor. Yet I can from my PC, Investigating Update: I'm using the ping driver, Noticed. it can only ping processor itself or google.com. In my case at least

Yes, I can Ping UDM, Yet I didn't set any rules

Hi. I downloaded the UniFi Network Controller driver for control4, but for some reason Can't make it work. Keep getting Error: 0-no communication. I have 3 Networks set on my Dream Machine. **1. Network equipment. **2. Office, House and Smart home equipment. **3. CCTV Cameras 192...10.2-39 Dream Machine Address is 192..1.1 Control4 Processor 192..9.1 I assumed Address should be my UDM 192.168.1.1 Any Help, Please

Hi, everyone. I'm currently working on choosing an alarm system for myself and my clients. My main goal always set it and forget it. My main question: Is there DSC compatible Wireless motion sensor with no delay. Most sensors I've tried, Short of ""Control4 and "ClareOne" has some logic in them to save battery power. Sensor thinks: "I just reported, so no need to report second time with in with in few long minutes" or "Was it a motion or not, lets wait to confirm" So far tried DSC, IQ, and ClareOne. My personal non security expert opinion DSC- Pros: Solid with serial connection. Cons: It is takes time. Qolsys - Didn't get to do much of testing, stopped on motion sensor issue ClareOne: It failed twice, what I remember, with in few months(2-3 months)

You once said: "With the variable manipulator you can do this using os.time() and os.date()." Can you please post some examples.

The first one Capital letter should be "Timestamp" instead of "TimeStamp"

Get log before rebooting. Yet, this is a different subject. I created this topic For timestamp problem, I can easily see many different scenarios where I'm going to use it.

.....when an internet comes back. I have one RMM. it is called OVRC.

I found 2 typos in programming, still may be more, Yet. can be proud of myself, I don't do this kind of programming. Tank You Everyone and big Thank You RAV Timestamp.c4i

I just can't believe it is not passable. Getting something as simple as current time and date

I agree with You. I'm looking at Generic TCP Command driver, I just can't buy them all. Yet at least. If You can suggest anything else I'm very open, My feeling for Generic TCP Command if/then I figurate it out, it opens more doors. As for ping Driver, It does what it promises yet at least, it didn't work for me. If Host is nor reachable variable doesn't get updated. I already killed all the screenshotted code, and there is a critical error in it, so if reused use caution. {}{}{}commands which stall everything else) these are new words for me

Before I figured out "Free Ping Driver" not going to work for this challenge, The Idea was to save Three Variables with ping results and send email with those results with timestamp attached to each of them, once internet gets back. The code on the screenshot is not final, but should give an idea.

Ether I'm doing something wrong or it is 3.2.4 version or else??. Variables: TempHoldTimestamp (string variable) Macro: Test Save Timestamp Delay: 2sec Set Variable ->TempHoldTimestamp to the value of test room->Timestamp->Timestamp As results I can see current Timestamp in Lua output of Timestamp driver. but "TempHoldTimestamp" variable doesn't get the value. it is get overwritten. before I had run the test macro, I vent to variable agent in put random characters in TempHoldTimestamp variable, It got empty after running macro

This is a very same website I've got from Chowmain support. Can You or some one Please point me to the direction where to start. Links, Pictures, Project Samples . I'm Working on 3.2.4 version. Thank You for taking your time.

First and foremost. Thank You everyone for response.

Here is a challenge I want to solve: Record events during the day or internet outage then by end of the day or when an internet comes back send an email with recorded events WITH timestamps. So I need to record the time of the event... My research got me nowhere while in the middle of this road i found people reporting doing so with Variable manipulator and os.time() and os.date(). yet Chowmain Software tech support told me I can do it. Had anyone actually done it????? Now I'm looking at Generic TCP Command Driver. Is there some sort of GET command to the controller to get the current Timestamp and then save it to the variable. I've been doing Smart home programming for 15ish years, just never got myself to go beyond click and drag, Better late than never: now time to get typing or copy and paste. Yet, it could be as simple as having an inexpensive device on local network with the driver what would have a current time as a variable -- Many thanks,

Variable Manipulator with time I just started playing with Variable Manipulator, and the first thing I got stock is how to get Time parameters

In my case Pushover part has been working very well for months (more then 6) as close to the perfect as it gets, I actually like it better over C4 home assistant new driver. Seems to be faster. If I may ask: What is Your local network build of?? Also I would check if it wasn't me creating self repeating loop.

I made it to send an email to myself, the things I have changed:: 1.Refreshed Webhooks key by copy and pasting it from IFTTT to C4s "IFTTT maker" 2.Copy Event name from IFTTT website to C4, not vise versa. Doubtful ... but

I noticed this in lua command "Encrypted Driver or Execute Not Allowed" doesn't stop over applets to work, I'm mot sure what to make of it. I just created new Home Assistant to control4 applet just fot testing and worked. Can't make Control4 to IFTTT

Thank you for response, I'm appreciate it. I think all of that verified by the fact pushover part is working, unless key is responsible for Webhooks only. while "Pushover Secret" and "Pushover Password" for Pushover. Can you Check screenshots above Thank you for great service

Anyone using IFTTT maker and webhooks can confirm whether it is working or not???