silverrules

Thanks Rav, Appreciate your response. So, If I find one that has a -1, will it be much easier for the remote technician to do the programing? Thanks again.

Hello, I have an older system with the HC800-BL-1 still running rock solid that is until last night when my system froze. After rebooting the rack it started working. I found a brand new HC800 on sale and about to buy it. The sticker on back on my HC800 is labeled: C4-HC800-BL-1 and the one on sale is: CONTROL 4 C4-HC800-BL HOME AUTOMATION SYSTEM CONTROLLER NIB g2 Some questions for you guys: -Will g2 be an issue? My old system is probably G1? Not sure how to check. -Is it plug and play, or do I need to transfer projects on a USB, etc to the new HC800....??? -How difficult of a job is this to swap the HC800? Appreciate your help in advance. Thanks !!!

bump

I have been changing the power adaptors but i was ordering the same amperage as the original power adaptors rated at 1.6A. I have a 3A adaptor on order and will know tomorrow if the amperage will make these puppies work. I even had my programer update to the latest software versions on them but no change..

Thanks Kevin. Just ordered 5V3A. Cross my fingers.

One other question. He has 4 other ones. These ones says HDMI over IP. What is the difference between the HDMI over IP vs HD over IP. My boxes says HD over IP and matches the 8 he has. Are the HDMI without the side brackets the older version or newer version. He is the picture of the HDMI version

Out of 8 JAP 1G receivers that we have in the house only two are producing videoe's. The chargers went bad one by one over the years and then the units. I get one green light for the power but no green light for the video. I have found a source that has 8 used 1G receivers and about to purchase them. He said he will take them back if they dont work Do I need to change the IP or will they work with the IP written on the boxes? The IP on mine is same for the first three numbers but the last number is different. Please see attached picture. Thanks

Hello Looking for 4-6 new Just Add power 1G VBS-HDMI-108A or VBS-HDMI-108POE . Thanks

Thanks everyone. You guys are awesome. Will update to 2.5.3 as noted.

Thanks for the heads up and saving us another round of troubleshooting. Will update to 1.8 when it arrives.

Thanks Amr. I been thinking about that and will do. If anybody has a brand old HC800 let me know please. Thanks

We have 7 SR-250's from back in 2011 and not a single one stopped working and the reason I purchased 5 more remotes just in case. The HC200's been great as well but will need to upgrade to HC250's just to get to 2.10.6 and then stop. The seller that I bought the 5 remotes from is sending a brand new old HC200 in box that has the version 1.7 software that will resolve the programing of the new old SR-250's. oh, the HC800's been in rocking for 7-8 years now too. Life is good with these oldies. Cheers

HC250 are $20 and EA1 more like $300.I have 5 of these throught the house. I am very happy with my current set up and it works wondefully and no plan to upgrade.. I let the braves keep upgrading.

Thanks guys. White & red box. I will ask them to downgrade to 2.53 one of the HC200’s for this purpose. I have five mew HC250’s coming next week for upgrade to 2.10 amd will just leave one of the 200’s for programing old new remotes.

Brand new remotes.

We recently upgraded the HC200's to version 2.9. I am being told that we need to down rev. one of the HC200's to older version software before the remotes are recognized. Is this really true? Thanks

Just bought 5 off ebay. Thanks

We will do that next. I need to find 5 HC250's first. I was told the HC200 needs to go before I can upgrade to 2.10.6 I am on the lookout for the HC250's.

Yes, SR250 is very old and works great when its programed

Thanks Amr and will do. I have the HC800 controller.

Thanks guys. Yes. remotes are brand new. I personally took of the plastic wraps. I will let him know to upgrade firmware using HC200.

Hello Our C4 echnicain tried to program new remotes yesterday with no luck. We have version 2.9 installed and my other SR250 remotes are working. I am just adding more remotes. The new remotes are SR-250 and brand new. When we press the Control 4 red button 4 times the Mac address does not come up on the programing screen and we cant get the remotes on line and as such not recognized. The screen on the remote keeps showing Control 4 remote. Pressing the room off and the few digit codes in the instructions did not reset the remote either. I even brought over the working remotes and pressed the red button 4 and the MAC address would not pop up on the computer screen. Any idea what we may be doing wrong?

Thanks nawty. Amp works great and in very good shape. Very happy.

Can you send a picture. Are these dimmable?

Please PM me with price, how many and if used or new. Part# C4-DIM1-Z-XX WIRELESS DIMMER Thanks