Jump to content

pat.samson.509

c4Forums Member
  • Content Count

    36
  • Joined

  • Last visited

Everything posted by pat.samson.509

  1. Thats what im thinking as well but cant seem to get it done. My PTZ (pelco brand) is behind the wirepath dvr so it doesnt have its own ip. Not sure if it matters or i just push the ip of the dvr in the driver like i do with my normal bullet cameras. If anyone has accomplished this let me know. Sent from my iPhone using Tapatalk
  2. Thanks Sent from my iPhone using Tapatalk
  3. Hi all, With the recent upgrade to os 3.1 i have lost my itunes driver. I am wondering what streaming service you would recommend that would be best for control4 integration ? Thanks Sent from my iPhone using Tapatalk
  4. Thanks Lots of work that sucks Sent from my iPhone using Tapatalk
  5. Hi all, I need to install the v2 epic driver. On the epic systems website it says to backup macros... Am i going to lose all alexa related programming when upgrading ? I am on 2.10.6 Sent from my iPhone using Tapatalk
  6. Hi all, I have for sale : a hc300 with brand new power supply and rackmount bracket. And a control4 speaker point. Any reasonable offer will do. Sent from my iPhone using Tapatalk
  7. Thanks guys. I just got a great deal on a Magenta HD-one LX hdBase T. Ill try it tonight. Thanks again.
  8. Hi All, I hope someone can help me out here as I don't have a clue how to figure this one out. I am extending my HDMI from a matrix to a 55inch TV. The signal is cutting on and off constantly. However when I connect my spare 19 inch TV it works fine. How is it possible for the video to flicker on the 55 and be fine on the 19 inch ??? The setup is like this : DVR/AppleTV/KODI -> to 4x4 HDMI matrix -> through Binary B-200-1CAT-HDIR HDMI extender -> to the TV.... There is a distance adjustment on the HDMI extender but I tried all possibilities 0 to 7....and then again it makes no sense cause everything is perfect on the 19, And before you ask, the 55 inch is brand new, I just got it to replace my existing 55 which I thought was the issue.. maybe I bought a TV for nothing ! oh well Ill deal with that later. Any help would be so appreciated, Thanks
  9. Yes that i understand, question is : is there a hue bloom driver ? Sent from my iPhone using Tapatalk
  10. Hi All, Just purchased a Philips Hue Bloom. Wondering if it can be integrated into control4? I already have regular bulbs from Hue into my control4. Thanks
  11. Hi All, I believe there is no driver currently for this but, would it be possible to have a driver in control4 that would integrate apple music without additional hardware (i.e : sonos) ? I know the API is available but don't have the knowledge to confirm this is achievable. Thanks
  12. Hi all, In need of 3 wireless dimmers. White. New or near perfect condition. Could be older models. Sent from my iPad using Tapatalk
  13. Hi All, I am looking for a non c4 solution to feed 4 audio zones. I already have my house with a full c4 system but this is for a side project. basically just want to be able to stream music via airplay to 4 zones and be able to have different sources (multiple ios devices most likely). I would need a 4 zone amp and like one or more airport express devices...just wondering what would be the best combination. I know there is lots of knowledge here. Thanks
  14. Hi all, I am using an external sensor (the recommended one by aprilaire i believe) to control my pool temperature. I see big fluctuations in the readout (+\- 5 degress within a minute sometimes) I tried another sensor and does the same thing. I was hoping maybe someone has advice on how to overcome this by perhaps installing a capacitor across the sensor on the tstat ? Any other advice is welcome Thanks Sent from my iPhone using Tapatalk
  15. Simple setup... I just have a hayward pump that turns on or off... So i used a wireless outlet switch that controls a 24vac tansformer. That transformer feeds a contactor that cuts power to my motor. Sent from my iPhone using Tapatalk
  16. I got the aprilaire sensor as recommended in the control4 thermostat manual. It work ok but seems it can vary quite a bit... I correct the offset in the software but seems sometimes it gets 2-3 degrees off the actual temperature. Sent from my iPhone using Tapatalk
  17. In good condition / like new please Sent from my iPhone using Tapatalk
  18. Found one. Thanks all. Sent from my iPhone using Tapatalk
  19. Looking for an old style c4 tstat Thanks Sent from my iPhone using Tapatalk
  20. Okay so i got my led control sorted out. I will use my c4 tstat for the pool. Could someone indicate which type of sensor i should use ? (Thermocoupe, etc...) Also, will i simply wire my 3 power cables (2 live + neutral) directly into the tstat ? Thanks again Sent from my iPhone using Tapatalk
  21. If i use a c4 tstat, will i get the pool interface on touchscreens and ios devices ? Sent from my iPhone using Tapatalk
  22. I have a spare c4 thermostat so that could work. So i would wire a sensor from the tstat to my pool, then have the tstat switch a relay to turn the heater on/off ? Sent from my iPhone using Tapatalk
  23. I like the idea, however i dont know if it would work for me. For the pool lights, its a led lamp which comes with its own remote (RF i believe) Not sure how i would control that... For the pool heater... When i shut the circuit breaker and pop it back on, my heater doesnt turn back on unless i go and physically press on the buttons and ask for a set point... So i wonder how it would be done also...i guess a thermostat with a probe in the water would do for turning it on or off but when turned back on, i wonder if it would heat up Sent from my iPhone using Tapatalk
×
×
  • Create New...