Jump to content
C4 Forums | Control4

EricNelson

c4Forums Member
  • Posts

    13
  • Joined

  • Last visited

Everything posted by EricNelson

  1. Awesome! Thank you so much Cyknight. It works, didn't end up needing a driver for the amp. Steps: 1) Add music to controller folder \\192.168.20.144(Controller IP)\media\audio\newfolder 2) From My device driver list, add driver Network File Storage. 3) Open that driver and set the location only to \\192.168.20.144(Controller IP)\media\audio\newfolder 4) Physically connect amp to Audio 1 of HC800 5) In Connections AV, select room, and connect Audio endpoint 1 to the Audio 1 of the controller. 6) In programming, Select Media, and then under commands, play media. Done!
  2. Okay, so say I want to play a song every time a contact sensor is triggered. In programming, what device is doing the playing? Is it the Amp? Or is it the network file storage? Is something like the programming below possible? When Room--> Contact sensor Contact is Opened Set Room --> (Amp,network file, hc800?) to Play song chopin.mp3 Also I just figured out that I needed to add a Network File Storage driver and then set the path to the controller audio folder. Anyway, now I can see my mp3 in the Network File Storage, but I still don't know how to play it.
  3. Would I still need a driver if I don't want to control anything on the amp? If I just want to feed it an audio signal through the RCA? Also, I didn't put the path anywhere, that is the path to where I copied an mp3. Is there a network share path driver?
  4. EricNelson

    c4 media

  5. EricNelson

    CPU

    From the album: c4 media

  6. Okay, I've added my mp3 to \\192.168.20.144\media\audio\newfolder\song.mp3 There are no devices under Media Scanner > Files to scan > Devices The 'Start Scan' button is greyed out, and all the folders on the right are empty. Which amp driver do I add? I have a guitar amp. But I can only find seemingly specific amps (Right now I put the 'Control4 8 Zone Amp' in) Thanks! Eric
  7. EricNelson

    Capture

    From the album: c4 media

  8. Sorry, I'm new to the AV side of composer. I want to plug my amp into the audio-out of the HC-800 using a red and a white cable, and have the Amp play they music that's coming through those red and white cables. Is there a way to play mp3's through the 'AUDIO OUT 1' STEREO connection of the HC-800? Do I need a driver to load the MP3s? Is it even possible to play music through the AUDIO OUT 1 Stereo connection? I feel like this should be very simple, but it looks like everyone else has the controller controlling another device that contains their music. Thanks
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.