poseidonsystems

Kb908 is something about the SR260 remotes.. Any other kb article that I should look at?

Yeah but it's tricky to compare Tesla and their Touchscreens with and Control4 with their SR260 entry level flagship remote. Control4 is a CONTROL company and Tesla is a CAR company. When their remote CONTROL is garbage then it's like Tesla's engines/transmissions are garbage. The touchscreen on a tesla is such a small component, but the remotes on a Control4 system are CRITICAL.

So this past week, I had several clients call and tell me that their remotes are substantially dimm. I checked the units, settings and they all are where they're supposed to be. So I called Control4 and obviously these are out of warranty (18 months old) and I have to charge the customer to replace them? This should be the most reliable component of a Control4 system, outside of the Controllers, and it is a complete disaster. I have about 20 remotes I have to RMA (not really because I'm getting charged). I don't know about you, but other dealers probably have the same issue. Thing is the SR 250's out in the field all look good. I feel like the SR260 is a huge step backward and it's really a big disappointment for our clients.

Yes, i'd love a trial driver!!

Anyone use bond for garage doors?

Yeah, I tried connecting but did all the following checks... Turned on digest Set the 'Connected to NVR to yes, etc...

Ok, so I did try this Driver and it looks like it claims to "Connect to cameras that are behind a Hikvision NVR" but after contacting support, they told me it was a typo?

I mean, the drivers are all on their website and they blatantly show that they support it. http://www.ltsecurityinc.com/control4compat

Why does the client not want to switch to a more energy efficient load with bulb replacements? So the bulbs are specific to their application so they can't really change the bulbs. It's a bunch of lights on this load, about 30 bulbs

Man No luck here, something is definitely up. I tried to change Port 80 to 65002, which is the port for the 2nd camera connected to the NVR.

sweet, is this one from drivercentral.io?

Thanks, I think this is a driver that sends them out from Control4, but I was looking for one that receives http requests into Control4 to trigger a Control4 event in programming.

Hi all, Wanted to see if there was a possibility to receive HTTP commands to actually trigger an event in Control4 so I can trigger some lighting behaviors. Basically, I have a customer that is running a billiards bar and wants the lights to turn on every time a tab opens for that billiards table. And when they close the tab for that table, then the light turns off. Any thoughts behind how I can go about doing this? I think I can get HTTP commands from the POS system/server. Let me know what you all think would be a reliable solution for this set up.

That was relatively quick, thanks c4 dudes!

Yea, I gave up on c4 outlets.. I just use tp link plugs/outlets so I can just gest shit done. I couldn't wait any longer for next gen outlets

Um yea, definitely didn't work for me.

I was looking into this as well.. But I think I can do hikvision pinhole cams with an IR smart bulb by LIFX to handle the night Vision?

Hi all, How do I display the weather based on a trigger or something through the Navigator to the TV screens?

Thanks Crustyloafer, Just to confirm, follow this diagram? I'm using just one single c4 dimmer on an 800 watt load.

I agree, I'm going to go with a Booster in this situation. The dimmer feels warm to the touch too so, I'm going to lean towards the right solution. Thanks all!!!

I would definitely wire to the garage door rails or at the close position The Myq driver keeps getting updated and you're better off just wiring this straight to the EA5

Hi All, I ordered a pixel remote from the first batch and I'm starting to see the pixels and a few black lines across the top.. Anyone else running into this? Haven't dropped the remote and all other functions work fine.

Can I use the forward phase dimmer on the 800 watt load or should I just use the Lutron booster?

There isn't something like a video wall matrix driver or something that can do the trick?

Hi all, I have a project that has multiple TVs in one room, that the customer just wants to control without changing zones. There are 3 Sony TVs, and he just basically wants to go to 'Watch' TV1 or TV2 or TV3 and then control each one. How can we get multiple Video End Points in one room, is basically what I need. Any drivers out there that anyone knows of that can do this?