poseidonsystems

Hi all, Running into a strange issue with a customer provided 'All Season TV' brand (https://www.weatherprooftelevisions.com/proddetail.php?prod=All-Season_FB55). For some reason, when I create a custom IR driver to control the TV, I pull in the IR codes just fine, but when I attach the IR bud, it blinks on the commands but the TV doesn't respond at all. I'm pretty positive about the IR receiver location on the TV as well and it's clearly marked. Is there some interference with IR for outdoor TVs? I've done this before successfully for Sunbrite and other outdoor tvs without an issue. Any suggestions?

I had the same issue for a lot of my installs. I had to remove the driver and add it in again and then the names came in. Not a fan that we have to go through this, I might look into another security system as well.

No for both? Or just touchscreens?

Does anyone know if the HC500 and the (C4-TW7C0-WH) touchscreens can take OS3?

Yep, it's listed NOW, but was not listed a few weeks before OS 3 came out. That's the pickle...

Hi all, Just wanted to let everyone know that the Interior Door Station with Camera is not compatible with OS3, so be aware. No one told me when I was purchasing this from the dealer portal and I installed the dang thing, it showed up on SDDP and then the drivers wouldn't get downloaded. Anyway, thought I'd share since C4 doesn't share it on their dealer portal either. Now I have to figure out what I'm going to do with this hole, thanks C4, come on. Completely pissed.

Yes, this happens when I try anything on the watch list

Hi all, I've been having a common issue with remotes that are on OS3. For some reason when I hit watch, then Cable TV, for example, the remote is still showing the 'watch' list and it stays like that for about 30 seconds or so and then it finally switches the remote over to ' Cable TV'. I tried this also on an iPad and it seems to go to the watch activity ok, but the control buttons, left/right up down, etc don't work for about 15 seconds and then they start working. Is anyone else having this problem with OS3? I spent hours on the phone with c4 tech support and even tried new remotes, new controller and disabling 2.4 ghz on the router etc and nothing yet. I am also seeing the same symptoms at another project where it was functioning properly with 2.10.6 and with 3.0 the remote / Nav is not updating properly when switching watch modes.

Yesss, the 1x2 hdmi splitter worked for me. I use this trick all the time... No idea why it works but I think it's an hdcp 2.2 override..

Yep, I'm having the same pandora and tunein skipping too on an EA-3. Customer asks me if it's playing on their Pandora app on their phone over wifi fine, why is it a problem with Control4?? What do I say now? Come on C4.

Has the installer contacted Control4 support? Unfortunately, I'm starting to see some stuttering on 2.10.6 on a customer 3 zone set up and I'm losing confidence in Control4 streaming if we have to go and buy autonomic streamers??

I think the link is dead, I have a MAG324, was wondering if there was an IP driver for this..

Oh man, I'd stay away from Onkyo

I use the videostorm IR usb and driver to control the Nvidia shield. Works great for me.

I have the same issues. I hate the sr260s. They really need to move along to the NEEO remotes that they acquired.

OMG, that's embarrassing..I thought when it clicks in, it connects the pins too..oh well.

No updates on this?

Hi Everyone, I'm working on a C4 project and all the touchscreens do not power on. I tried testing and testing the Cat5e cables and all 3 of the touchscreens in my install are not powering on. Is there something I need to do in order to get these to power on? I tried linksys PoE+ switch, Araknis injectors, and went through a bunch of different ones and nothing. All I get is a solid blue LED in the back box. What's going on here? Anyone have a tip, or is there a switch on these things?

Oh man, that's kind of steep...$285 for an 8 channel..and $100 might as well get 4 Control4 I/Os relays!

Hi all, I have 3 shades that are controlled via low voltage wall buttons. Each one has three buttons which is up/down/stop. I can access the wires in the back and when I short each wire, they do their respective action, shade up, shade down, shade stop. However, I am looking for a network controlled relay that connects to wifi or wired network and I can just make generic http calls. Any one know of a device that can do this??

Did the SSL Patch ...worked now! Thanks sonic30101

Hi All, Just another weekend install for a 1 room set up. Turned into an all day troubleshooting fiasco and I'm reaching out to the forums to see if anyone has a solution. So here's the deal, I have an EA-1 that has 2.9.1 loaded up, brand new in the box. I Connected to the network, I can see it in Composer and System Manager just fine. When I Open Composer, Choose "Local System", it shows up just fine, I choose the Controller (EA-1 192.168.1.108), then click Connect and then I get an error "Could not connect to Director 192.168.1.108. I've tried the good old network reset, same result. I also tried the factory reset, same result. Any luck or am I just wasting my time? This is the second controller that I've opened new and had random problems with..What's the deal C4??

Thank you for sharing this, it's great! However I have lights connected to the system as well. Ia there a way to add the frafik eye lights in?

Yes, there is NO documentation and support for this...just urban legend that 'it works'.

Yeah, unfortunately I called Lutron and then they told me to call C4 and then C4 told me to call Lutron..