poseidonsystems
c4Forums Member-
Posts
270 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Everything posted by poseidonsystems
-
Ok gotcha, When you say "Yes, Netplay Manager. This can run concurrently on the VRX040, if desired. I don't recommend it." So the TV is a Samsung 85" TV so I went with a VRX040 for the decoder on the Samsung 85" but do i need to get a netplay manager too? Is that what you mean? I see you also have the CMX1616A2 audio switch with NAB100....There are ceiling speakers that are run back to a 70 volt amp with an RCA in. The customer wants to be able to choose from 4 different sources to hear the audio in the ceiling speakers so I'm assuming the CMX.. audio switch will do the trick here. I also called Videostorm and emailed them and had no luck, I'm guessing it's a small support shop over there...
-
By 'Matrix Manager' do you mean Video Storm NetPlay Manager? (http://www.video-storm.com/proddetail.asp?prod=nvmm) .. "If the system is going to expand, start off right and get 2 VRX's (1 for endpoint and 1 for matrix manager)" You mean I need 2 VRX040's for 1 display to show a 2x2? Sorry, just got a bit confused by this comment too.
-
Gotcha, I'm looking for a device that can be expandable to add in more TVs and have flexibility with two cat5e/Cat6 wires to each TV. The project will easily expand to 15 TVs that will required the 2x2 PIP set up that I think Videostorm will be a flexible solution. Does that sound right?
-
What simple device are we talking about? That integrates with Control4?
-
Very helpful, I have a similar situation where a customer has a conference room and wants to see 4 video cable box sources on one 85" screen. I'm assuming for this configuration a Cat6 from TV to the rack room/switch for wring will do to cover 4 source PIP. My materials should be the following... 1 - Video Decoder (VRX040) for the Samsung 85" display 2- 4 HDMI encoders (1 for each cable box) OR the Shineco SNK6214 3-One Netplay license (comes with VRX040) I wouldn't need a Netplay Manager, right? I mean the control4 system would handle all the Netplay configs, right? Thanks for the clarification...the Videostorm site is a little confusing...
-
Stream Audio from RCA over Network
poseidonsystems replied to poseidonsystems's topic in Push the Envelope
It's a substantial cost at around $700 each. -
Stream Audio from RCA over Network
poseidonsystems replied to poseidonsystems's topic in Push the Envelope
What would advanced audio allow me to do? So I won't lose streaming audio through the network connection? I remember calling support a while back and was told Id lose streaming audio, but not rca input audio. -
Stream Audio from RCA over Network
poseidonsystems replied to poseidonsystems's topic in Push the Envelope
Would that work? -
Stream Audio from RCA over Network
poseidonsystems replied to poseidonsystems's topic in Push the Envelope
I did some research and this is exactly what I needed...but is there something that is more of a plug and play set up? This looks like it uses RTP.. http://www.crazy-audio.com/projects/raspberry-pi-for-audio-distribution/ -
Hi All, I have a customer that is on 2.9.1 and is eager to get an upgrade to access all the streaming music features. Problem is, I have 2 speakerpoints that are working ok on streaming audio, but upgrading to 2.10 and above will break the audio streaming to the speaker points that are located sporadically through the house. They only have a network hook up. Is there a device that can take the audio out of from the EA-3 into the device and then stream over the network and receive and play out to the analog inputs of the Speakerpoints? I feel like I saw something like this at CEDIA 2016 in Dallas but I can't seem to find it. Is there any other solution rather than making the customer drop $$$ for 2 triad ones? Thanks!
-
LTS NVR driver doesn't connect
poseidonsystems replied to poseidonsystems's topic in Troubleshooting, Workarounds, & Bugs
You mean, in the ip address field put in "192.168.1.220:65001" right? -
LTS NVR driver doesn't connect
poseidonsystems replied to poseidonsystems's topic in Troubleshooting, Workarounds, & Bugs
Yea, tried that.. No luck -
Hi All, We decided to try LTS NVRs for a customer of ours since they fit the budget and had some promising C4 integration. We have 16 cameras all ready to go and we try to load up LTS drivers and can't get anything to show up on the navigator. After calling LTS they told us to call C4 and vise versa. Anyone have experience properly connecting their LTS NVR to their c4?
-
I was able to chat with Howard at Blackwire to get the driver to work. It works how I'd like it but I think next time I'm going to go with a PoE switch for the cams and just have generic IP drivers to access cameras on the navigators. Howard was definitely helpful! He sent me to these instructions that didn't really come with the driver originally: https://3olxlp2h4a4u9p5jx4my87ku-wpengine.netdna-ssl.com/wp-content/uploads/NVR_DVR_Manfell.pdf
-
Does anyone have a driver for the Hikvision NVR 7600 series? I'm trying to be able to view the cameras on a touchscreen and navigator. Can this be done? I've tried the blackwire designs driver and it doesn't really work and also the houselogix hikvision driver disappeared.
-
I'd be interested if this had an IP driver.. Anyone find a driver for this 4x4 matrix?