Mulligan

I assume your LOL was referring to me having the hookup and programming handled. Yes, I have that handled. Even the programming. Just need the hardware.

I have the hookup and programming handled. Just need the hardware

I was wondering if anyone would be happy to PM me to provide a quote for the following. I need a new controller. I currently have an HC800 but am looking for an EA5 for my new home. I need 8 remotes with charging stations. I am hoping the new style remotes are easier to see the screens. I need an audio matrix TS-AMS-8/24 I need a video matrix C4-HDBTEB-B. Please let me know if this comes with the transmitters and receivers or if these need to be ordered as well. I need 8 receivers and only 4 transmitters but could always find a use for the others of they come with them.

We have a bathroom with 2 TV's , each has a Just Add Power receiver. I want to tell Jap Switch Output 13 to do whatever Jap Switch Output 17 does. I have gone to Programming -> Master Bathroom -> Events "When video selection changes" and tried conditionals but they do not seem to play well with the JAP Switch driver. Does anyone have any experience programming conditionals with the JAP switch in Composer that could shed some light on how they got it to work? I was able to setup a macro and use loops to at least get it to work for the first two sources but there are 10 total sources to view and whenever you go above two it stops working,

This is how it is now wired This is how it is now programmed. Still no joy. Oh well, I will let you know what I finally figure out incase anyone else needs a pictorial for dummies like I do. Thanks for the help.

I added a phantom Control4 108 amp and bound it to the room and the relay and contacts

Thank you. I updated my post since you replied. This is what I am using now with the two wire. Still just getting constant 12V. know it must be a simple solution, im just not finding the correct combination I guess.

I tried using the diagram below and put a jumper cable from GND to COM and then put the TIP on 12V and the other end to NC. When testing the plug I am getting 12V for all conditions. Am I not reading this diagram correctly? I have added the correct CONTACT and RELAY to the correct AMP and room assignment but curious as to why I am getting the constant 12V vs when only the room is selected on or off. Thanks for the clarifications.

Wow, just as I thought I had found a DIY line, I come to find that video-storm will not sell me the VRX040 directly. Does anyone know where to get them on-line? Everything else is available or third party but the 1 important part is the VRX040. I guess I could use another option such as Nvidia Shield but was hoping to keep it simple

We have 3 audio amplifiers and wanted to use the 12v trigger to turn them on and off when one of the 6 zones are used in each amp. # 1 - Is it best to use Relay or Contact? # 2 - The amps are not added to the rack. Would 3 fake amps need to be added # 3 - If we used 3 relays or contacts, will they each only turn when a room assigned to that amp is used?

I would like to purchase 2 C4-Z2IO or another model that will handle sending the IR codes to a TV in a kitchen that is non-wired. Please contact me if you have 2 available for quick delivery.

Pricing is elusive. How does the Video Storm compare to JAP pricing?

We are looking at converting our control4 system from mainly component to HDMI. We have a Control4 Audio Matrix that handles the sound in all rooms but the movie theater so each input has a component splitter that send audio to both the Audio Matrix and the Movie Theater amplifier. If we were to go to a JAP type system, what HDMI Audio Extractor do you recommend? Also, in our current setup, we have no sound going to any TV as all sound is going through the in wall speakers in every room. Will this extractor allow both pass-through to the TV and also extracted to the audio matrix or is it just one or the other?

I currently have an Audio Authority AVX-562 with qty of 3 Model 1176 that expanded the system to 16 video locations in our home. This system is still operating fine but I want to get ahead of it going out so now is the time to look into new technology. I was looking at the JAP technology to give me the flexibility I need to add more than the 5 sources we have now (5 sources + Navigator). We currently have 16 TV locations but may add 1 or 2 more so the expandability of this system seems ideal. Is the JAP system the best option at this point? I know that I will have a few interesting scenarios as Cat5 is run to almost all of the locations with the exception of 1 or 2 that may just have component cables run. Hopefully there are options with the JAP system to handle those.

Sorry to bring this thread out of the dust we too have many switches in the home that we just purchased where the rockers are broken on one side or the other. My local dealer will not call me back so not having any luck with them to get it sorted out. Can someone let me know where I can purchase them? There are 10-15 in my home that currently need replacing and there is no way I am going to pay to replace the entire switch!