Jump to content
C4 Forums | Control4

Mjhill1234

c4Forums Member
  • Posts

    53
  • Joined

  • Last visited

Everything posted by Mjhill1234

  1. I am sure there was some way to upload custom wallpaper to the older T2 touchscreens but I can't locate it! I only have 1 theme available on the screen at it asks if I want to go to the 4Store to download others but then just hangs I can see there is a UI Agent in Composer and a number of wallpapers can be selected but "Apply to.." does not show any of my screens (which are all T2). All screens are running 2.9.1.549509 and director is 2.10.6.561784 Thanks
  2. Driver v160 OS 2.10.6 looks like there may be a general problem
  3. Good evening. I am having some problems adding my TIDAL account details. I go to the authentication link and authenticate successfully, I get a message back from apps.control4.com saying "Success! Close this window and return to the Control4 app" but the account is not added and I get into an endless loop. Same if I try and do it via Composer. Any ideas? Driver version is 160. Thanks
  4. Thank you - yes it does play the output to Zone2 - have tried it manually and its working.... the challenge I am having is how to switch on zone 2 and change the matrix input to output the sound to the other audio zones
  5. Happy Christmas Eve everyone! I am trying to find a simple way to get the audio from my TV fed to another zone. I have a Lowe TV with its digital out fed into a Marantz AV7701 which is housed in my rack. As I have a motorised TV bracket its great for viewing from the dining room where I also have ceiling speakers which are fed from my C4 Audio Matrix. I would like to have the option to feed the TV audio to this room and possibly other rooms. I have physically connected the Zone 2 output of the Marantz AV into the matrix and made that connection in Control4 but thats as far as I have got with regards to getting anything working. Is this simple to accomplish?
  6. This is 100% correct - I just replaced the 6 220uF caps in my AMP108 and its working perfectly (for now). On testing the ones I removed only two of them were significantly off value. Relatively simple to do armed with a solder sucker and an iron.
  7. Thank you all. Interestingly enough there are system variables for these blinds already defined which don’t change if I operate them outside C4 but using these I have what I want working now! Probably completely wrong and not optimal but it works! I’ll post the code later on when I have access to my PC
  8. I have installed some motorised blinds in my house which are based on motors manufactured by Neo http://neosmartblinds.com/smartcontroller/ has a C4 driver and works very nicely (so far). These blinds are zebra type and have three memory positions set on the motor (fully open, intermediate and fully closed). The standard "shades" menu within C4 sends the fully open, stop and fully close commands only so to get it to stop at the intermediate position I have programmed a custom button to issue a 'next up' and 'next down' command which works well. What I would like to achieve is a single custom button called intermediate that contains the logic of if blind is fully open > send next down, if blind is fully closed > send next up, else do nothing. The challenge I have is there is no way to smartly query the status of the blinds so I would need to set some sort of flag or variable that I can query. I understand this would get messy if the blinds are controlled at any point outside of C4 or if if a blind fails to respond but I can live with that as at night I will be fully closing all blinds or could program some 'calibration' function I guess. Is this something that is simple to do or utter madness! Can the default behaviour of the buttons in the shades menu be changed to avoid using custom buttons? Thanks
  9. Hello all, I had a slight incident which involved breaking the DB9 serial cable from my Pakedge P20 PDU to my controller I have purchased a RJ45 -> DB9 cable but this is not working so I assume the pin outs are different. Does anyone know what the pin configuration of this cable should be? Thanks
  10. Working!! The indent trick has just saved me going insane and given me lots of fun things to do while in lockdown Thank you kindly
  11. I'm obviously doing something idiotic as if I use the the above it just just power cycles the amp when the room is turned on or off When the variable Kitchen->POWER_STATE changes If Room Kitchen Room Power is ON Set 5 ON on Rack>PDU If Room Kitchen Room Power is OFF Set 5 OFF on Rack>PDU I disabled everything else
  12. Thank you thats exactly what I was looking for! Will give that a go thank you
  13. I've got it "working" using the following logic: When the audio selection changes > set outlet 1 to on When the room turns off > delay 10 seconds > set outlet 1 to off If I don't add a delay the amp turns off and directly back on again when the room is powered off. Not sure if there is a better way of doing this but it appears to work.
  14. They are Crown DSI 1000 amplifiers so no auto sense or any trigger control. Also on the matrix I can't see a suitable event to use to switch the amplifier on for example I can use on the outputs. For example if I use "When any audio setting changes on Audio Output 1" > Turn on outlet 1 on PDU and "When the room turns off" > Turn off outlet 1 on PDU. The AMP will power on perfectly but on room power off powers the amplifier off then back on again assuming because this also qualifies as a "...any audio setting changes...". What I want is for the amp to turn on whenever there is a call for audio in the room/zone and turn off when the room is powered off. Getting slightly more funky would be to power off the amplifier if the audio is paused for 10min etc.... So I guess the question is what do people generally use as a Room Event to power on an amplifier? Thanks
  15. Hello I have an audio matrix feeding a number of stand alone non-intelligent amplifiers that are powered by a Pakedge PDU. What sort of triggers do you use as best practice to power the amplifier on for a room when there is audio playing and off when it’s not? Thanks
  16. Thank you. In my case even with the app open the doorstation won’t call my phone. All other screens work fine both me calling them and then calling me. Also I can call the doorstation when in monitor mode and two way audio/video is fine! Just when someone presses the door bell everything rings apart from my phone :-)
  17. I’ve got a system running 2.10.6 with an EA5 as the main controller, a heap of T2 video touchscreens and a DS1. Intercom anywhere is working perfectly between the screens and my phone and I can happily “dial” and connect to the door station and get audio and video. The only thing that does not work is a call initiated from the doorstation rings all the screens but not my mobile device. Is anyone aware of a workaround to this other than buy a DS2
  18. £1000 inc postage anyone before it goes on eBay or I keep as a spare :-)
  19. Still for sale, offers around £1200 including postage before it goes on eBay?
  20. Replied and also replied to eggzlot.
  21. Mjhill1234

    EA5 for sale

    EA5 fully working order. Rack ears a little tatty and a couple of marks on the front but good condition other that that! Payment via PayPal only so we are all protected. Happy to list via eBay also if preferred but cost of eBay fees to be added to the agreed price! Please PM for photos/details Based in the U.K. and open to offers Thanks Matt
  22. Thanks I was not planning on installing an alarm system but looking for various cost effective sensors that could be used in programming logic. So low price wired sensors that work with the I/O on controller/extender
  23. Sorry to tap into this thread but I’m also looking for cost effective PIR sensors but wired, I’m based in the U.K. and doing a house refurb so hard wired is an option. Does anyone have any recommendations for small in ceiling PIR motion sensors ?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.