l3anks

Recently added a few rokus to my system and noticed that plex would continue to play my recorded series/episodes even after you room off. I ensured the "on power off" was set to Home but it does not bring you back to the home menu when hitting room off. I'm launching apps from the universal mini drivers. I noticed if I hit watch and select the roku, and not the mini driver, the on power off or on power on commands work. If I use mini drivers, it doesn't seem to function. Am I missing something in my setup or doing something wrong with the mini drivers? Curious if anyone else is experiencing this. Thanks

You’ve nailed it. Don’t set auto updates while using UniFi APs. Their updates frequently break so you need to run old firmware or stay in early access / beta release channels

I recently upgraded to the UniFi enterprise 48 port poe switch. It’s total overkill for my use case but it works well on a large C4 project. the only issue I have is with my moip setup and requires some manual configuration within the switch CLI to make it work. It may not survive a reboot or update. Outside of that I haven’t seen any issues. I also manage several UniFi wireless networks and would avoid them if possible. I’ve seen a ton of issues with bugs in firmware or their newest products which requires running old or bleeding edge versions to be stable. It could be viable if you’re looking for short term solution to get you by until ruckus or other higher end 6e APs are available I currently run UniFi APs within my home and plan to replace with ruckus once 6e is available DM me if you want any specifics on my setup

Thanks The one I'm testing is dedicated to HT as well. I'll test a bit more and see if I can replicate similar behavior when attached to my matrix, other rooms, shared mini drivers etc Yep same experience here. Had to turn it off after the latest update.

Apologies somewhat off topic question but I was testing on an LG CX with C4 CX driver and noticed the behavior act like a Roku device. I can select the mini driver app, the source remains as the selected app such as netflix. I'm not seeing anything in documentation about passthrough. Just wanted to double check that when using the shield there isn't a method to keep the selected app as the source. Are LG and Roku the only 2 options that will work this way?

Just picked up a shield pro and testing out this driver. When I select any of the mini drivers, netflix , hulu , plex , etc , my remotes/touchscreens will show the app I selected, like netflix, briefly and then switch to show "SHIELD TV". Is this normal behavior or should it continue to show the app as the source?

There's an updated driver now in beta testing. This is using the new iaqualink API and looks promising so far. Hopefully there will be limited issues and will release soon

Anyone else seeing issues with concord4 integration? Panel is showing offline but manual key presses through the C4 interface seem to pass to the system based on keypad feedback. However there are no events being logged within the history and the panel shows offline within composer. I also had a random alarm triggered today and can't find the reason. The alarm isn't logged in history but all other sensor events are there and logged for about 10 minutes after the alarm. Nothing has logged since. IIRC there were some bugs related to date and time around this time last year. I'm guessing there is something wrong with my panel but wanted to double check to make sure it's isolated to my project. Thanks

I’ll try calling that number tomorrow Here’s the reply that I was sent We are looking into these reports and will get some information from the Home Automation developer team. Best Regards, Our office will be closed on Monday, May 31st for the Memorial Day holiday. Pool Owner Technical Support Technical Support Rep (O) 800-822-7933 2882 Whiptail Loop # 100, Carlsbad, CA 92010 FluidraUSA.com

They replied to me from techsupport.vista@fluidra.com. Could try that one as well

I've contacted their product support email and it sounds like they are at least aware of the issue but I couldn't get an answer if they are actually working to address it or if they are deprecating support for this. I would recommend everyone to email productsupport@fluidra.com to report this problem

You can program a single, double, triple tap on the micros themselves to perform an action

Clarifying question : please define what is offline? are you saying if connectivity is offline it asks you additional questions? generally it won’t respond with questions to voice commands. The dealer will configure it so when you say “watch movie” it will close the shades, dim the lights, etc

ntpd is a time service which keeps hardware in sync and signal 15 is a restart service request. ntpd can restart itself if the clock drifts too far from actual time. This could indicate a hardware problem or something is triggering a service restart. Are there any logs before the signal 15?

Would like to test this as well.

I might be late to the party on this but just noticed the volume up/down now gives some haptic feedback within the c4 iOS app. Hope they start adding this to more or all of the buttons within the app. Makes control via c4 app so much better for the end user.

Yep I noticed some errors being returned from their API saying too many requests. They may have tweaked some rate limits. Control4 and Jandy are both aware of the issue now so hopefully we'll have a quick resolution

Spoke too soon. This did bring the controller online and I was able to read temps but was not actually able to control pumps. C4 status page now shows

In the driver properties, I erased username password and serial number and click set next to each. I waited a few minutes and added everything back. For the serial # I did not use any dashes. From actions tab I clicked each of the items, get new session, get home screen, get devices. Controller went from an offline state to an online state and regained control through C4.

Was able to blank out all settings, serial , username and password. Set it all again and everything connected and is reporting online. Not sure if that was the actual fix or if it forced a reconnect.

Agree and thanks for checking. I'll post something through the dealer portal and see if the issue can get raised. Thanks

We have a project where pool control through C4 stopped working within the last 48-72 hours. Don't believe there were any changes to the project or network. Using the latest iaqualink driver, we're seeing xml errors. ReceivedFromCom ReceiveBuffer is now Failed to post v1/mobile/session.json: HTTP response code said error HandleMessage. Message is ==>Failed to post v1/mobile/session.json: HTTP response code said error<== Error: message is not valid xml Anyone else having similar issues or can you confirm pool control is still functioning?

Agree with all your points. There is a risk that they will pull the plug, and honestly, I wouldn’t be surprised if they did. My investment in this is pretty low and I personally think it’s worth the risk so far. That may change in the near future. Wanted to suggest it as it could be a good option for some on here

Yeah would still recommend it. IMO I'm not concerned about google's game studios closing and is probably good for stadia overall. It narrows their focus on the stadia platform and allows them to work with 3rd party studios to offer the top rated games or contract exclusives instead of trying to dev their own. This has failed for amazon a few different times. If you compare it to last gen consoles, stadia graphics are on par or above a ps4 pro. CP2077 launch was a huge flop on ps4 and xbox because it couldn't run the game smoothly. Stadia actually ran it rather well. Another benefit is the lower cost to try this out. You can basically play on anything that can run a chrome browser with any bluetooth controller or use a chromecast ultra + wifi stadia controller. You only need a subscription if you're interested in their free monthly games, 4K HDR + 5.1 surround Downside is the size of their game library but they have been expanding quickly.

I know this isn’t a ps5 but would recommend google stadia. Use chromecast ultra + stadia controller which is WiFi. Controller works anywhere in the house or patio and can game on basically any screen